ETCnomad & ETCnomad Puck
wherever you want to go
Hopping from gig to gig and can't bring your console with you? Doing the lighting in a venue whose desk has seen better days? Want to unlock multiple platforms with just one device? That's where ETCnomad control comes in. Small enough to fit on your keychain, the ETCnomad USB plugs into your computer and opens up the power of
High End Systems' Hog 4 PC software, so you can program and run shows anywhere.
It can serve as a primary controller, a backup, or a client device – or work offline entirely – operating on either a PC platform running Microsoft Windows® 7 or higher, or natively on a Mac running Mojave (v10.14) or later.
ETCnomad is available in a base or unlocked version. The base unit supports 1024 outputs while the unlocked version supports 6144. (Note that Eos Software 2.8.X or earlier unlocks the base at 512 rather than 1024.)
Note that without the USB key, the software functions in offline or mirror mode. The ETCnomad is upgradeable to reach maximum capacity.
- Supported protocols include Net3/ACN/sACN and ArtNet
- DMX/RDM Gateways (Net3)
- Show Control Gateway
- I/O Gateway
- Eos Programming Wing
- Eos Motorized Fader Wing 10 or 20
- Eos Fader Wing 20 or 40
- ETC Gadget II USB-to-DMX/RDM converters (up to four may be connected for a total of four local outputs)
- iRFR, iRFR Preview and aRFR
- ETCpad (ETC Portable Access Device)
- Third-party USB-MIDI panels via Direct MIDI
When you use it as a primary or backup, the system output is determined by the device with the lowest output configuration. When it's connected as a client, the output capacity of ETCnomad is ignored.
To find out what features are supported and to see user-interface descriptions, check out the Eos Family and Element documentation
NOTE: ETCnomad is also compatible with
Hog 4 PC.
Afraid your computer will get roughed up or go missing during a busy programming schedule? ETCnomad Puck is your answer. It offers all the flexibility and capabilities of ETCnomad, but comes in a secure mini-computer that only allows ETC applications to be installed. That means you can get your work done without worrying about security risks.