Specifically designed for auditoriums where smooth dimming is essential, the high-performance ArcSystem Pro Drivers provide power and dimming control for Pro One-Cell luminaires, with stepless dimming from 100% to absolute zero and back to full again.
The ArcMesh D1 Driver is designed to operate with Pro One-Cell and Pro One-Cell Small luminaires, providing a single, addressable output for direct connection to the remote fixture.
A High Output version of the D1 driver providing increased output support for use with the Pro One-Cell High Output luminaire.
Designed specifically for use with the Pro One-Cell Micro luminaire, the D2 driver provides two individually addressable connections and is sized to allow insertion and removal through the smaller ceiling aperture requirements of the Micro.
A larger, wall-mountable driver, the D4 CC 150 provides four individually addressable outputs to power Pro One-Cell and One-Cell Small luminaires.
D4 CV drivers are both rack-mountable and wall-mountable and are designed to allow direct connection of 24 VDC CV LED loads, such as LED tape or linear LED strip luminaires. Select from CV 150, 350, and 700 versions.
All drivers have a wide range input from 100-277V and are sized so that they can be installed through cutouts from below the ceiling for recessed luminaire installation. Installation is surprisingly simple with these high-performance drivers. An onboard antenna provides you with the option of operating the drivers wirelessly, which makes the installation process a breeze for both new projects and retrofits. Luminaires can also be addressed remotely over the ArcMesh wireless network. A wired-only version utilizing on-board DMX-with-RDM is also available.
All ArcSystem drivers and luminaires are available as a dual-input emergency variant, providing UL924 and CE compliant emergency egress lighting solutions. Refer to product datasheets for more information.
For a quick overview of ArcMesh Driver compatibility, review the chart below.