Specifically designed for auditoriums where smooth dimming is essential, the high-performance ArcSystem Pro Drivers provide power and dimming control for Pro One-Cell luminaires, with stepless dimming from 100% to absolute zero and back to full again.
The D1 Driver is designed to operate with Pro One-Cell and Pro One-Cell Small luminaires, providing a single, addressable output for direct connection to the remote fixture.
A High Output version of the D1 driver providing increased output support for use with the Pro One-Cell High Output luminaire.
Designed specifically for use with the Pro One-Cell Micro luminaire, the D2 driver provides two individually addressable connections and is sized to allow insertion and removal through the smaller ceiling aperture requirements of the Micro.
A larger, wall-mountable driver, the D4 CC 150 provides four individually addressable outputs to power Pro One-Cell and One-Cell Small luminaires.
Installation is surprisingly simple with these high-performance drivers. All drivers have a wide range input from 100-277V and are sized so that they can be installed through cutouts from below the ceiling for recessed luminaire installation. ArcSystem Pro drivers are wired
utilizing on-board DMX-with-RDM.
All ArcSystem drivers and luminaires are available as a dual-input emergency variant, providing UL924 and CE compliant emergency egress lighting solutions. Refer to product datasheets for more information.
For a quick overview of ArcSystem Pro Driver compatibility, review the chart below.