Switch and Repeat
Switch
The Pharos Switch provides a simple power and networking solution for four Power-over-Ethernet devices.
Simple networking
An unmanaged switch with five 10/100Base-TX Ethernet ports with standard RJ45 sockets, perfect for connecting power and data between Designer Controllers and Designer Remote Devices. Four ports are enabled for Power-over-Ethernet with an uplink
connection to a computer, network, or other non-PoE device. Switch comes in a cost-effective low-profile plastic DIN rail enclosure and only requires a 24V DC power supply.
Features
PoE Technology
Combine power and data in a single Ethernet cable using PoE (IEEE 802.3af and IEEE 802.3at) technology, making it easy to locate your Designer LPCs, TPSs, and RIOs where you need them.
Multiple Ports
Use four ports to power and connect multiple Designer controllers or remote devices (or other IEEE 802.3af or IEEE 802.3at compliant devices).
No Commissioning
The simple unmanaged switch can be deployed as required and operates out of the box, with no commissioning required.
Repeat
Pharos Repeat is a four-port DMX512 repeater/splitter compatible with the RDM standard to provide DMX output distribution to luminaires and other devices.
Optically isolated splitting
DMX splitters are an essential requirement for most control systems, allowing multiple separate cable runs from a single DMX output and ensuring electrical isolation. Repeat comes in a cost-effective, low-profile plastic DIN rail enclosure with
install-friendly connectors.
Features
Four Outputs
Repeats a DMX signal to 4 outputs, each allowing for 32 DMX devices to be connected.
RDM
Supports the Remote Device Management protocol (ANSI E1.20), allowing devices connected to any of the four outputs to communicate back to a Pharos Designer controller over the DMX link.
Isolated
Opto-isolated input and isolated, self-healing output ports