ETC Source Four LED Series 2 lights City of Angels
Date Posted: 1/15/2015
Lighting director Howard Harrison used ETC
Source Four® LED Series 2 Lustr® luminaires
City of Angels
musical at The Donmar Warehouse, in London's Covent Garden.
The musical depicts a 1940s Hollywood writer working on a film noir thriller. The play switches between gritty, black-and-white film scenes, and the real writer and his friends, shown in bright, vivid color.
"This is the first time the show has been revived," says Harrison, "and one of the biggest challenges was performing it in the 250-capacity space. We needed flexibility of color without using too many fixtures. I'd heard about Source Four LED Series 2, but had never used them, and despite not having the time or resources to do any kind of tests or shootouts, I was keen to give them a try. They turned out to be exactly the right thing."
The color-changing abilities of the Source Four LED meant that the show could provide film-quality black-and-white by using high-color-temperature white light beside the warm, cozy-colored light needed for the real-life scenes, which, says Harrison, would have been a challenge with traditional fixtures. The production also used automated lights supplied by ETC dealer PRG, controlled by the Donmar's ETC
Eos® control desk
Harrison describes himself as being very grateful to be able to use the luminaires, given that they had a limited budget: "They are a winner in a small space where there is not much room," he says, adding that the LEDs' color-changing capabilities mean that he needs fewer of them than he would with conventional luminaires. "The Series 2 units really do an awful lot. I'm an absolute convert," he told Mark White, ETC's regional manager for the UK and Ireland.
Harrison is the lighting director for the original production of the hugely successful
among many others, and won an Olivier Award in 2008 for Macbeth. At the Donmar, he worked closely with Chief Electrician George Dives and Deputy Chief Electrician Tom Wickens, who oversaw the installation of a new ETC
Sensor3™ power control system
White comments: "Because of the ETC power and control infrastructure, Tom and George were able to seamlessly integrate the Source Four LEDs using RDM to patch the discovered channels into their system. The Donmar Theatre Sensor3 installation also includes ThruPower modules, which were configured in this case to provide constant power to the Source Four LEDs."
Photo credit Johan Persson