Skip to main content
Electronic Theatre Controls Inc

First Time Setup Backplane Dipswitches

CEM3 Backplanes include a dipswitch field which is set in the factory during the manufacturing process of the Sensor3 rack. There is a Dip Switch Map permanently attached on the underside of the CEM3 processor for easy reference.

Several items are determined by the dipswitch settings on the backplane:

System voltage: 120V or 230/240V

Rack Size: 6, 12, 24, 36, or 48 (numbers of modules)

Is the rack advanced features ready? Yes/No

After setting up the switches on the backplane move on to quick rack setup and patching to complete the setup.

  • Was this article helpful?