Back
  • Sensor Rack Transfer/Config mismatch

    Question:

    I did a rack to rack transfer on one CEM in my system.  Now the rest of the CEMs say CONFIG MISMATCH.  What did I do wrong?

    Answer:

    Sometimes in multi-rack system when you do a rack to rack transfer; once that is complete the rest of the CEMs in the system think there is a new config on the CEM that you did the transfer to.
    Easiest way to solve this is to do a rack to rack transfer to all the racks that are giving you the CONFIG MISMATCH.  After you have done that the system will become stable again.