Back

Sensor3 Dimming

  • Sensor3 Installation Racks

    • Ideal for professional theaters, broadcast studios, concert and performance halls.
    • Standard system and rack monitoring with diagnostic reporting, as well as dimmer-specific load reporting and diagnostics.
    • High dimmer density.
    • Adaptable modular design.
    • RideThru - Optional accessory that holds the processor electronics through a power outage for a number of seconds.
    • Battery Pack - Optional accessory that holds the processor electronics through a power outage for a number of minutes.


    CEM3 Power Control

    • Point of Control Interface - Easy-to-read display shows you pertinent system information.
    • Backup looks - 64 presets with programmable fadetimes and priority allow for take-control, pile-on, or live-control failover sources to insure that your show will never go black.
    • ThruPower - Triple function mode that allows the new ThruPower Modules to operate each circuit as dimmer, relay, or constant.


    ThruPower Modules

    • Ideal for applications where load types are not likely to be known at time of installation or are likely to change frequently.
    • Dimming, constant-circuit power, and switched power modes - all in one module.
    • Voltage, current, temperature sensor in all modes.
    • Power any kind of lighting fixture.


    Sound Suppression

    • Significantly cut down on cooling-fan noise for quiet performance.
    • Sensor Sound Suppression Hoods (SSSH) for installation Racks, and Skirts (SSSs) for Touring Racks, reduce fan noise for acoustically sensitive installations.
    • The sound suppression kits reduce the sound produced by the ventilation fan by surrounding it with an enclosure lined with sound absorbing foam.


    Dimmer Doubling

    • Double your dimming control capacity without adding to your dimmer inventory.
    • Allows 2 lighting fixtures to operate independently using only one dimmer. 
    • Run 1 circuit from any 120V, 60Hz Sensor or Unison dimmer to a conventional outlet. Connect a Dimmer Doubler, and plug in 2 Source Fours with 77V HPL lamps...That's It!
    • Dimmer Doubling is especially beneficial for facilities that need more circuit potential in their existing, limited wiring system. 



  • Sensor3 CE Installation Racks2


     

    Sensor3 CEM clip

    Sensor3 module clip SSSh SSSs linedrawing


    Dimmer Doubling clip