Fader Stations

S P E C I F I C A T I O N S

GENERAL

• UL and cUL LISTED
• CE Marked

FUNCTIONAL

• Operate default or custom system functions including preset selection, manual mode activation, record mode activation, station lockout, raise, lower, sequence control, zone on/off, room combine, macro activation and timed event override
• Fader functions include master, zone, fade rate, or preset
• Custom button and fader functionality programmable via LightDesigner configuration software
• Programmable electronic lockout levels
• Buttons allow programming of individual lockout levels.

MECHANICAL

• Standard configurations with 7 or 12 buttons and 4, 7, 10, 13 or 16 faders
• Support for 1-12 buttons and 1-16 faders for custom applications, contact ETC
• Enclosed electronics assembly
• Faceplate with no visible means of attachment
• 45mm slide potentiometer faders and cantilevered switch arrays with removable caps
• Flush mount in industry standard back boxes
• Surface mount back boxes available from manufacturer
• Constructed of injection molded, ABS plastic in five standard colors, matched to RAL standard colors
• Custom colors available with sample
• Indelibly marked legends in a contrasting color
• I ntegral RGB LED response indicator for each button and fader
• Integrated IR receiver

ELECTRICAL

• Connect via Echelon® LinkPower control network utilizing low voltage Class II wiring
• Topology free and polarity independent wiring over Belden 8471 or equivalent and (1) #14 ESD drain wire
• Wiring may be bus, loop, home-run or any combination of these
• All station terminations are connectorized
• UL and cUL LISTED, CE marked

THERMAL

• Ambient room temperature: 0-40°C / 32-104°F
• Ambient humidity: 30-90% non-condensing

PHYSICAL

*Flush Backbox Dimensions

Or equivalent

Surface Backbox Dimensions*

*Surface mount back boxes provided by ETC

Faceplate Dimensions*

*Dimensions typical

ORDERING INFORMATION

Button Stations