Expansion Bridge

The Echo Expansion Bridge provides control of the Echo control system from the Unison Paradigm architectural control system. This bridge between control systems enables Paradigm control of Echo presets and zones.

The Expansion Bridge also allows connection of up to four individual Echo segments (control systems) so more control stations and Responsive Controls can be used within an Echo control system. Each segment supports 16 power controllers and up to 16 Echo devices (stations or responsive controls). Expansion Bridge integration enables Echo segments to share spaces, presets, and zones.

Note:  The Expansion Bridge does not add additional spaces, presets, or zones to the Echo system totals.

Expansion Bridge configuration can be accomplished through the use of the EchoAccess App or through Unison Paradigm LightDesigner software.

For more information on installing the Expansion Bridge hardware, see the EchoExpansion Bridge Installation Guide. All ETC documentation is available for free download from etcconnect.com. For information to configure the Expansion Bridge in a Paradigm system, reference the LightDesigner configuration software online help system.

Wink, Edit, and Delete

Options are available to [Wink], [Edit] and [Delete] an Expansion Bridge that has been discovered or manually connected from the Wi-Fi Connection page. Simply drag the name to the left, revealing the [Wink], [Edit], and [Delete] buttons.

ClosedWink

Use the Wink feature to determine which Expansion Bridge to select when more than one displays in the list.

ClosedEdit

Selecting [Edit] displays an Edit IP Address dialog. Enter the new IP Address, then tap [Ok] to close the dialog. The new IP Address will display in the Wi-Fi Connection page with an unknown device name. Selecting the new device will prompt the EchoAccess App to connect to the Echo control system.

ClosedDelete

Selecting [Delete] removes the selected Expansion Bridge from the Wi-Fi Connection page. There is no undo. If you need to add an Expansion Bridge, tap [Add IP Address] and identify the unit by its IP Address.

Configuration

To configure the Expansion Bridge you are connected to, select Configuration from the EchoAccess menu, then select the Expansion Bridge from the devices list (it will be the first device in the list when viewed in the default sort.)

See General Configuration and Space Configuration for information on the device's configuration settings.