About Submasters

Submasters can store any parameter data for channels. When storing from Live, Record Only and Record can both be used to determine what contents are stored. You can copy cues, presets, or palettes to a submaster as well. Channels running effects can be loaded onto a submaster. See Effects on Faders

Submasters can be controlled by faders or by the keypad. Faders can be configured as submasters (see Submaster Properties ) or they can be defined while programming.

In Blind, submasters can be created by using the [Thru] [Thru] syntax.

• [Sub] [1] [Thru] [Thru] [1] [0] [Enter] - will create subs 1 through 10.

When set as a submaster, the bottom buttons beneath the fader can be configured for different functions. See Submaster Fader and Button Configuration.

It is possible to program upfade, dwell, and downfade times in association with the submaster bumps. See Submaster Properties.

Blinking LEDs

When a submaster bump LED is blinking, it means that the submaster must be homed due to either changes to its content or to its mode. In either case, reset the submaster by dropping it to zero and the moving it back to the desired position. The LED will also blink when the submaster is in a “Hold” state via bump button timing.