Group Selection

Groups may be selected from the control keypad or the direct selects.

To select a group:

• [Group] [1] [Enter] - selects all channels in group 1.
• [Group] [1] [At] [5] <0> [Enter] - selects group 1 and places all channels within at 50%.
• {Group 1} - Selects all channels in group 1.

If [Next] is used after a group selection, it accesses the first ordered channel in that group. Pressing it again accesses the second ordered channel in that group, and so on. [Next] - used after the last channel in the group - accesses the first channel in the group again.

[Last] may be used with group selects similar to [Next]. Press [Select Last] to reselect the entire group.

Using Groups to Select Channels

[Group] can also be used as a quick way to collect channels from various targets.

• [Group] [Cue] [#] [Enter] - selects all the channels in the specified cue.
• [Group] [Sub] [#] [Enter] - selects all the channels in the specified submaster.
• [Group] [Int Palette] [#] [Enter] - selects all the channels in the specified intensity palette.
• [Group] [Effect] [#] [Enter] - selects all the channels currently using the specified effect. Channels are selected in the order they were used or stored in the effect.