Home

As with the {Home} button on the Encoder Display (see Home ), the [Home] hardkey allows you to home a specific parameter. Additionally, you may home all of a channel’s non-intensity parameters or home only a specific category (I, F, C, B).

Element Classic users will need to use the {Home} softkey located in the ML Controls.

Homing a channel, category, parameter, or submaster will return it to the default value.

• [1] [Home] [Enter] - homes all parameters for channel 1, except intensity.
• [1] [Color] [Home] [Enter] - homes all color parameters for channel 1.
• [Group] [1] [Color] [Focus] [Home] [Enter] - homes the color and focus parameters of all channels in group 1.
• [Sub] [1] [Home] [Enter] - homes submaster 1.
• [Sub] [1] [Thru] [Home] [Enter] - homes all submasters.

Home Preset

You can select a preset to provide home values for all non-intensity parameters (instead of fixture library default values) when home commands are used. Store a preset with modified home values for only the channel parameters you would like at a different value than default, and then assign that preset to Home in Setup (see Home Preset). Any channels that are not included in the preset assigned to Home in Setup will use their library defaults.