Channel Check

Channel check allows you to quickly step through all of your patched channels. This is useful for checking lamps or checking focus.

Note: Parked addresses will not be affected by the channel check feature.

The following examples illustrates how to use the channel check feature:

[1] [At] [7] <0> {Chan Check} [Enter] - brings channel 1 to 70% intensity.
[Next] - channel 1 returns to its background state and channel 2 is set to 70% intensity.
[Next] - channel 2 returns to its background state and channel 3 is set to 70% intensity.

Use [Next] or [Last] to progress through the channel list to complete the channel check. Any other key press other than [Next] or [Last] will terminate channel check mode.