Back
  • ETCNet2 Video Node

    The ETCNet2 Video Node provided a way to extract video information from the network and display it on one or two VGA monitors. A typical use would be a way to monitor the state of the console from the stage managers desk or production table.

    The node took a 12V DC power supply input; its outputs included RFU and PS/2 Keyboard Ports on the front, and two VGA outputs plus an RS232 Serial Port and a Remote Macro (contact trigger) Port on the rear.

    ETCNet2 Video Nodes are able to output network video from Obsession (v4.4.2+) and Emphasis when running in Net2 mode. In Net1 mode they can output video from Express, Expression, and Obsession (v4.4.2 and earlier).