Dimmer Doubling DD (Multiplexing) On The Sensor CEM
Dimmer Doubling in 3.x CEM software:
Setup, [1]-Dimmer, Mode: DD (for each dimmer to be doubled)
Dimmer Doubling (Mutiplexing) in 2.x software:
You need to set in 3 places
- [Setup] [3]-System, [>] [>] (Mux Disabled) [^] (Mux Enabled) [Enter]
- [Setup] [2]-Rack, [>] [>] [>] Port A or [>] [>] [>] [>] [>] [>] Port B Mux: No, [^], Mux: Yes [Enter]
- [Setup] [1]-Dimmer, ## [Enter] [^] Mode: Multiplex [Enter]
- [Exit] [Exit] to get back to home screen