How to achieve the traditional cyc-lighting look of a ground row and top row by mounting Selador units in clusters at the top or the bottom of a cyc, focusing them on different vertical sections, and using lenses to precisely spread the light.

Application Note about design themes in Control Designer

NEC Acceptability of ETC UL Listed Dimmers and Associated Branch Circuits Operated at 100% Load, 100% Continuous Rating. By Steve Terry, written specifically for Engineers and AHJs

Suggested placement of Selador Series LED fixtures to wash cycs

Adding & configuring sensors in LightDesigner

By Steve Terry (2010), Discussion of UL924, UL1008, and other Codes pertaining to Emergency Lighting Control

The safe use of Selador LED luminaires to illuminate works of art, objects in a museum or similar delicate photosensitive objects requires knowledge of the ultraviolet radiation emitted.

This Application Note identifies as well as describes the various control functions of Paradigm

Mike Wood discusses the problems with defining "White' in regards to LED based light.

Mike Wood takes a look at the fundamental functions of an LED.

Mike Wood discusses the quality of light from LEDs.

A quick how-to about setting minimum light levels

An explanation of entertainment lighting control philosophy by Anne Valentino and Sarah Clausen, ETC Control Product Managers.

Incorporating Hubbell Building Automation sensors in Unison systems

To assist you with system design, understanding, use and specification of ETC distribution equipment.

Included in this document are typical Unison ERn enclosure worst case BTU outputs

David North walks you through the process of identifying the correct dimmer system for your installations.

Application Note about the new D20FB modules

Application Note about software and firmware updates to Unison Paradigm components

Understanding Common-Neutral (Multi-wire) Branch Circuits and Phase-Control Dimming Installations. Updated for 2008 NEC code

David North discusses what to consider when selecting a fixture.

Power Feed considerations for Distributed Dimming systems

Unique Global Dimmer Load Survey Delivers Surprising Results

By Steve Terry (2005), Different Meanings and Applications for AIC and SCCR

By Ellen White (2005), Brief on the two Nationally Recognized Test Laboratories

Understanding Wire Temperature Ratings, Dimmer Racks, and Conduit Fill. By Steve Terry (2005), Key Points to Help Explain Wire Temperature Ratings

by David North (2004), Choosing between Dimmer and Relay Modules

By Steve Terry (2004), A successful GFCI Dimmer installation relies on a number of factors that must be planned well in advance.

By David North (2001), Simple explanation of rise-time

Accoustic Tests for ETC Dimmer Racks by Soundcoat in Irvine, CA

The key to achieving both beautiful and functional results