Sort By:- By Product
Architectural Control Systems - By Document Type
- View All
 How to achieve the traditional cyc-lighting look of a ground row and top row by mounting Selador units in clusters at the top or the bottom of a cyc, focusing them on different vertical sections, and using lenses to precisely spread the light. Application Note about design themes in Control Designer NEC Acceptability of ETC UL Listed Dimmers and Associated Branch Circuits Operated at 100% Load, 100% Continuous Rating. By Steve Terry, written specifically for Engineers and AHJs Suggested placement of Selador Series LED fixtures to wash cycs Adding & configuring sensors in LightDesigner By Steve Terry (2010), Discussion of UL924, UL1008, and other Codes pertaining to Emergency Lighting Control The safe use of Selador LED luminaires to illuminate works of art, objects in a museum or similar delicate photosensitive objects requires knowledge of the ultraviolet radiation emitted. This Application Note identifies as well as describes the various control functions of Paradigm Mike Wood discusses the problems with defining "White' in regards to LED based light. Mike Wood takes a look at the fundamental functions of an LED. Mike Wood discusses the quality of light from LEDs. A quick how-to about setting minimum light levels An explanation of entertainment lighting control philosophy by Anne Valentino and Sarah Clausen, ETC Control Product Managers. Incorporating Hubbell Building Automation sensors in Unison systems To assist you with system design, understanding, use and specification of ETC distribution equipment. Included in this document are typical Unison ERn enclosure worst case BTU outputs David North walks you through the process of identifying the correct dimmer system for your installations. Products
Document Type
White Paper
Release Date: 01/29/2009 Application Note about the new D20FB modules Application Note about software and firmware updates to Unison Paradigm components Understanding Common-Neutral (Multi-wire) Branch Circuits
and Phase-Control Dimming Installations. Updated for 2008 NEC code David North discusses what to consider when selecting a fixture. Power Feed considerations for Distributed Dimming systems Unique Global Dimmer Load Survey Delivers Surprising Results Products
Document Type
White Paper
Release Date: 02/10/2006 By Steve Terry (2005), Different Meanings and Applications for AIC and SCCR By Ellen White (2005), Brief on the two Nationally Recognized Test Laboratories Understanding Wire Temperature Ratings, Dimmer Racks, and Conduit Fill. By Steve Terry (2005), Key Points to Help Explain Wire Temperature Ratings by David North (2004), Choosing between Dimmer and Relay Modules By Steve Terry (2004), A successful GFCI Dimmer installation relies on a number of factors that must be planned well in advance. By David North (2001), Simple explanation of rise-time Accoustic Tests for ETC Dimmer Racks by Soundcoat in Irvine, CA The key to achieving both beautiful and functional results
|
|