Back

ArcMesh Drivers

  • S P E C I F I C A T I O N S
    FEATURES
    • Wired-DMX or wireless ArcMesh control protocols
    • Stepless smooth dimming to absolute zero
    • Silent operation
    • Convection cooled
    • Suitable for air handling/plenum use
    CONTROL
    • Wired DMX or wireless ArcMesh control protocols
    • Wired DMX input via 2 x internal RJ45 connectors (in and through)
    • Simple one channel operation
    ELECTRICAL
    • Universal line voltage input = 100-240VAC 50/60Hz
    • Full-load power consumption: 25 Watts
    • Standby power <1W
    • Internal 4 pole Molex connector for direct connection of ArcSystem luminaire
    • Internal terminal block for connection of line voltage input (Emergency version has an additional line voltage connection for sensing power failures - see diagram below)
    MECHANICAL
    • Metal construction
    • Two knock out plates at each of the Driver for cable strain relief or direct conduit connection
    • Pre-drilled holes on rear of case for easy securement of driver
    THERMAL
    • Convection cooled
    • Operating temperature range: 32°F to 104°F (0°C to 40°C)

    PHYSICAL
    Product Dimensions* Product Weight
    MODEL HEIGHT WIDTH DEPTH
    inches mm inches mm inches mm
    D1 Driver 3.49 89 9.58 243 1.56 40
    MODEL WEIGHT SHIPPING WEIGHT
    lbs kgs lbs kgs
    D1 Driver 1.35 0.61 1.70 0.77

    ArcMesh D1 Driver
    ArcMesh D1 Driver