ETC One Port Gateways and RDM

Last updated
Save as PDF

Over the years, ETC has made several different versions of the Net3 One Port Gateway. The initial version does not support RDM. Subsequent versions do support RDM.

Gateway Version 1-Net3 Gateway

Manufactured before April 2014- Discontinued
Supported Net2 and Net3
Identifiable via two status LEDs:
- Net
- DMX
Current sw version 4.3.2
Visible in and configured via:
- GCE v3.1.1 or newer
- Net3 Concert v1.1.1 or newer

These Gateways Do Not Support RDM

Gateway Version 2- Net3 DMX/RDM Gateway

Manufactured after April 2014- Current product
Supports Net3
Identifiable via three status LEDs:
- Power
- Network
- DMX
Current sw version 6.1
Visible in and configured via:
- Concert v1.1.1 or newer
- UpdaterAtor v4.3.1 or better

These Gateways Support RDM

Gateway Version 3 - Response DMX/RDM Gateway

Manufactured beginning March 2015- Current Product
Supports Net3
Identifiable via three status LEDs:
- Power
- Network
- Data
Current sw version-6.0.1
Visible in and configured via:
- Concert v1.1.1 or newer
- UpdaterAtor v4.3.1 or better

These Gateways Support RDM