0-10V Response Gateway
Adaptable dimming for everyone
The Response 0-10V Gateway accepts sACN or DMX control input and provides 24 channel's of 0-10V control output, making it ideal for both retrofit and new power-control system installations that use four-wire LED drivers and fluorescent ballasts. The Gateway also accepts a UL924-listed contact closure to set each channels output to a predetermined level for use in emergency systems.
Configuration of the 0-10V Gateway is simple using the onboard four-button user interface. The Gateway can be mounted anywhere standard DIN rail is installed. An optional DIN rail mounting enclosure is also available.
Customize your dimming
Configuration of the 0-10V Gateway is simple using the onboard four-button user interface. The Gateway can be mounted anywhere standard DIN-rail is installed. An optional DIN-rail mounting enclosure is also available.
- Supports 24, 0-10V control outputs up to 50mA per output
- 18-24VDC power input
- Supports sACN or DMX control input
- UL924 listed for use in emergency systems
1-Port Response Gateway
DMX and RDM to Ethernet in a DIN rail enclosure
ETC's Response One-Port Gateway provides data distribution using the quality and reliability of ETC's network development. Built for using industry-standard streaming ACN (sACN), the One-Port Gateway unlocks the power of your networked system. It also uses bidirectional Ethernet communication with other network devices to send or receive DMX512 and Remote Device Management (RDM) signals.
The One-Port Gateway supports up to 512 addresses of control.
- Uses ACN and streaming ACN protocols
- 1 DMX port
- Distributes up to 512 addresses over Ethernet
- Configurable for DMX input or output
- Supports Remote Device Management (RDM)
- Supports Power over Ethernet (PoE 802.3af) or 9-28vDC external power supply
- Configured using Net3 Concert™ configuration software
- ANSI E1.17 ACN protocol compatible
4-Port Response Gateway
Light, sleek, and affordable
ETC's Response 4 Port gateway is a DMX/RDM distribution device built on the quality and reliability of ETC's network development. This gateway is perfect for networking systems using the industry standard streaming ACN™ (sACN) protocol and is compatible with mounting and power supply accessories available for other DMX/RDM gateways.
In the same manner as other ETC 4 Port gateways, it uses bidirectional Ethernet communication with other network devices to send or receive DMX512 data and RDM messages. It’s available for use as a table-top, rack-mount, or pipe-mounted device.
Unlike the original Net3 line of Four Port gateways, the Response 4 Port gateway does not have interchangeable sleds. This creates a lighter, and more affordable product. The following models are available as standard:
- 4-DMX out
- 4-DMX XLR in
- 3-DMX out, 1-DMX in
- 4 XLR RJ45 ports
- 4-DMX terminals
- 4-DMX terminals DIN rail Format