-
If your relays are chattering or not firing in your Sensor, Sensor+ or Unison rack there may be a problem with the neutral wire on your signal distro card. Make sure that the neutral wire is present and connected on both ends. This problem can also cause ELV10 modules to not work correctly in test mode...
-
When equipment goes bad out in the field, it's often extremely helpful if the owner/end user can keep track of the circumstances of the failure. This is especially true when the problem is intermittent and might not occur when the technician is present. Service Technicians are exceptionally skillful...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
08-24-2009
Filed under: AAS, Acclaim, arri, ASTS, AVAB, CEM, CEM+, Congo, CongoJr, cRRFU, DAS, Dimmer, Distribution, DMX, ECMUX, Element, ELTS, Emphasis, Eos, ETCLink, Ethernet, Express, Expression, GCE, Idea, Ion, Irideon, K96, KnowledgeBase, Legacy Unison, LMI, Lon, MDD, MDR, MicroII, MicroVision, MIDI, MPE, NCE, Net2, Net3, Obsession, ObsessionII, Pharos, RDM, Response, RFR, RFU, RRFU, RS-232, RVI, Sensor, Sensor+, SineWave, SmartBar, SmartFade, SmartFadeML, SmartModule, SMPTE, Source Four, Source4, Touchscreen, Unison, Vision, WRFU
-
Manuals Unison Mosaic Control User Manual Unison Mosaic Control Knowledge Base: Help Your Technician Help you
-
Manuals Unison DRd User Manual Unison DRd Dimming Knowledge Base: High Altitude Effects on Sensor and Unison Dimmers NEC Classification for Sensor and Unison Dimming Common Neutral Wiring in ETC Systems UNDERSTANDING WIRE TEMPERATURE RATINGS, DIMMER RACKS AND CONDUIT FILL Can I Buy Beige Touch-up Paint...
-
Manuals Unison SmartLink Brochure Unison SmartLink Control Knowledge Base: What Depth Back Box Does ETC Recommend for Equipment Installations SmartLink DRd Rack Interconnection Help Your Technician Help you
-
The legacy Unison remote and Unison Heritage remote are the same hardware, however some changes were made to the remote and button placement that will affect their functionality. Both remotes are compatible with Legacy Unison hardware, however the Heritage remote must be used for Unison Paradigm systems...
-
Question Within Legacy Unison Light Manager, I see a dialog appear titled "P80" with the text "The Win 16 Subsystem has insufficient resources to continue running. Click on OK, close your applications, and restart your machine." This error might occur frequently, and cause the software...
-
Default IP configuration by product Product IP Address Subnet Mask Gateway IP Unison 10.101.10.101 255.255.0.0 10.101.10.101 Obsession Primary RPU 10.101.30.101 255.255.0.0 10.101.30.101 DMX Node 10.101.0.99 255.255.0.0 0.101.0.99 Default subnet mask and gateway Item Value Subnet Mask 255.255.0.0 Default...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
07-27-2009
Filed under: CEM+, Congo, CongoJr, DMX, Element, Emphasis, Eos, GCE, Ion, KnowledgeBase, Legacy Unison, Net2, Net3, Obsession, ObsessionII, Sensor+, Unison, WRFU
-
Quick Summary: If you've got devices with electronics inside being powered from a dimmer in a sensor rack, set the firing mode to switched . If you're on a Unison rack, a SmartPack, a SmartBar, or a SmartModule, set the mode to non-dim What those options mean: Non-dim dimmers output regulated...
-
Module Information Summary This summary provides module information broken down by market and application. Four major market groups are used to separate modules: UL market – ETC Americas, 120v-60hz power, Sensor and Unison products CE market – ETC Europe, 230v-50hz power, Sensor CE and Unison...