-
Manuals Response 96 Out User Manual Response 96 Out The Response 96 Out was a Demultiplexer unit that converted either DMX512, AMX192, D192 or K96 control data to 0-+10V analog. It provided 96 channels of analog output. Data Input Selection The type of input is defined using DIP switches inside the unit...
-
Response 512 Out The Response 512 was a digital to analog converter (DAC) that converted up to 512 channels of DMX512 to Analog 0-10V control. Due to its impressive size it was colloquially known as the "Moby DAC". Knowledge Base: Response 512 Out "Moby DAC" Quickguide Help Your Technician...
-
Manuals Response 96 In User Manual Response 96 In The Response 96 In was an Analog to Digital Converter that could convert up to 96 channels of 0 to +10V or 0 to -10V analog input to either DMX512 or D192 digital protocols. It was available in a portable or rack-mount version. The rackmount versions...
-
Manuals Response 32 Out User Manual Response A32 Out User Manual Response 32 Out/A32 Out The Response 32 out was a compact 32 channel digital to analog (demultiplexer) unit. The standard 32 out accepted DMX512 only; the A32 out could also receive AMX. DMX address was set with three thumbwheels on the...
-
Manuals Response 2212 User Manual Response 2212 The Response 2212 was a protocol converter that allowed you to connect equipment from different manufacturers by converting supported digital or AMX192 protocols to any other supported protocols The 2212 supports protocols including: Avab DMX-512 CD80/AMX...
-
Manuals Response Converter User Manual The Response Converter allows you to convert 192 DMX512 channels to AMX192 or 192 AMX192 signals to DMX512. Knowledge Base: Response Converter Settings Quickguide Help Your Technician Help you
-
Manuals Response Merger User Manual Response Merger The Response Merger combines two incoming DMX512 signals into a single DMX512 output signal. This allows two consoles to control the same lights with highest level taking priority. DMX DATA PINOUT 1 COMMON 2 DATA - 3 DATA + Data Loss Behavior Hold time...
-
Manuals Response Network Controller User Manual The Response Network Controller (RNC) was a combined protocol converter, DMX patch unit and HTP merger. It featured two input and two output ports supporting DMX, D192, K96 or AMX192 data protocols. To connect to your Response Network Controller and configure...
-
When equipment goes bad out in the field, it's often extremely helpful if the owner/end user can keep track of the circumstances of the failure. This is especially true when the problem is intermittent and might not occur when the technician is present. Service Technicians are exceptionally skillful...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
08-24-2009
Filed under: AAS, Acclaim, arri, ASTS, AVAB, CEM, CEM+, Congo, CongoJr, cRRFU, DAS, Dimmer, Distribution, DMX, ECMUX, Element, ELTS, Emphasis, Eos, ETCLink, Ethernet, Express, Expression, GCE, Idea, Ion, Irideon, K96, KnowledgeBase, Legacy Unison, LMI, Lon, MDD, MDR, MicroII, MicroVision, MIDI, MPE, NCE, Net2, Net3, Obsession, ObsessionII, Pharos, RDM, Response, RFR, RFU, RRFU, RS-232, RVI, Sensor, Sensor+, SineWave, SmartBar, SmartFade, SmartFadeML, SmartModule, SMPTE, Source Four, Source4, Touchscreen, Unison, Vision, WRFU
-
RESPONSE 32 OUT/A32 OUT DMX DATA PINOUT 1 COMMON 2 DATA - 3 DATA + AMX DATA PINOUT 1 COMMON 2 CLOCK + 3 CLOCK - 4 ANALOG ANALOG OUTPUT PINOUT 1-32 CHANNELS (1-32) 35-36 COMMON DATA TYPE SELECTION DMX SW1 UP, SW3 DN AMX SW1 DN, SW3 UP FILTERS NONE SW5 DN, SW6 DN SMALL SW5 DN, SW6 UP MEDIUM SW5 UP, SW6...