-
ETC recommends using rechargeable batteries. As with any rechargeable battery, we have found that these provide the best source of power and longest operating life when allowed to be fully discharged and then fully charged. Most users simply use the RFR and then plug it back into the recharger when done...
-
Manuals Net3 Radio Focus Remote Setup Guide Net3 RFR Gateway Configuration Editor (GCE) Knowledge Base: Net3 Radio Focus Remote (RFR) Setup On Congo Net3 RFR Base Station LED States ETC Network IP Addresses Charging Batteries for the Net3 Radio Focus Remote (RFR) Help Your Technician Help you
-
The Net3 Radio Focus Remote (RFR) base station has a single bi-color LED that indicates different states: Solid Green = powered and running Slow Irregular Blink Red/Green = wired or wireless data activity Rapid Regular Blink Red/Green = identify function (probably triggered by GCE - should timeout after...
-
When equipment goes bad out in the field, it's often extremely helpful if the owner/end user can keep track of the circumstances of the failure. This is especially true when the problem is intermittent and might not occur when the technician is present. Service Technicians are exceptionally skillful...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
08-24-2009
Filed under: AAS, Acclaim, arri, ASTS, AVAB, CEM, CEM+, Congo, CongoJr, cRRFU, DAS, Dimmer, Distribution, DMX, ECMUX, Element, ELTS, Emphasis, Eos, ETCLink, Ethernet, Express, Expression, GCE, Idea, Ion, Irideon, K96, KnowledgeBase, Legacy Unison, LMI, Lon, MDD, MDR, MicroII, MicroVision, MIDI, MPE, NCE, Net2, Net3, Obsession, ObsessionII, Pharos, RDM, Response, RFR, RFU, RRFU, RS-232, RVI, Sensor, Sensor+, SineWave, SmartBar, SmartFade, SmartFadeML, SmartModule, SMPTE, Source Four, Source4, Touchscreen, Unison, Vision, WRFU
-
There are a couple of specialized steps for setting up the Net3 RFR on Congo as opposed to Eos/Ion. On the handheld unit, find an available frequency and set the channel as described in the RFR setup guide. With the base station plugged into the Congo go into [System Settings] from the Heartbeat screen...