-
Manuals Designer Control Console User Manual CH2 Control Console User Manual CH200 Control Console User Manual LMI Knowledge Base: Designer Console Manual CH-200 User Manual LMI Designer Console DMX Upgrade Requirements Help Your Technician Help you SD12000 Power Cubes L86 Dimmer Module Choke Retainer...
-
On RD touring and Install racks there was a protection fuse on the power test points. The fuse holder caps unfortuneatly can be damaged or lost easily. Part Number Decription X107 FUSEHOLDER; 34887 SQUARE X108 FUSECAP; BLACK X109 FUSECAP; RED X110 FUSECAP; BLUE F102 FUSE 2A 3AG FAST 312.002 LFU Note...
-
HD Dimmers and You HD dimmers predated RD dimmers, and were manufactured by LMI in the early 80's.ETC still stocks several parts for this rack -- the connectors, the fuses, triacs, and the fuse holders. ETC can also perform board level repairs on the clock cards and dimmers. As each of these touring...
-
Front of an EMI3M The EMI3M electronics module is installed in the top left slot of the L86 dimmer chassis. It isolates the DMX512 input signal from each of the L86 EM64 control modules, and also provides isolation between the EM64 modules. The EMI3M is typically not used where each dimmer bank is controlled...
-
Front of the EMD The EMD is an empty chassis for an L86 rack. It can be compard to an AFM for a Sensor Rack, in that it does not serve any purpose other than filling a space in the rack. However, the EMD is important as by filling that space in the rack, it will ensure the proper movement of air and...
-
Question: What other types of cubes were used in the L86-2400? Answer: Q116 was used in early L86-2400 modules. They have screw terminals in all four corners.
-
This is ETC part number: HW818, described as: Lift and Turn Latch, #62.
-
Manuals SD Individual Dimmer Datasheet SD Single Dimmer There are a couple of styles of SD12000 dimmers. The "old" style used two cubes mounted to the heat sink. We no longer have any of these old cubes, nor can we get any more. If you requesting new power cubes for your SD-12000 dimmer, you...
-
DMX Chip Locations on an EMR/EMAR/EMAP DMX Out - Z45 Labeled SN75172 DMX In - Z41 Labeled SN75173
-
When equipment goes bad out in the field, it's often extremely helpful if the owner/end user can keep track of the circumstances of the failure. This is especially true when the problem is intermittent and might not occur when the technician is present. Service Technicians are exceptionally skillful...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
08-24-2009
Filed under: AAS, Acclaim, arri, ASTS, AVAB, CEM, CEM+, Congo, CongoJr, cRRFU, DAS, Dimmer, Distribution, DMX, ECMUX, Element, ELTS, Emphasis, Eos, ETCLink, Ethernet, Express, Expression, GCE, Idea, Ion, Irideon, K96, KnowledgeBase, Legacy Unison, LMI, Lon, MDD, MDR, MicroII, MicroVision, MIDI, MPE, NCE, Net2, Net3, Obsession, ObsessionII, Pharos, RDM, Response, RFR, RFU, RRFU, RS-232, RVI, Sensor, Sensor+, SineWave, SmartBar, SmartFade, SmartFadeML, SmartModule, SMPTE, Source Four, Source4, Touchscreen, Unison, Vision, WRFU