-
When equipment goes bad out in the field, it's often extremely helpful if the owner/end user can keep track of the circumstances of the failure. This is especially true when the problem is intermittent and might not occur when the technician is present. Service Technicians are exceptionally skillful...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
08-24-2009
Filed under: AAS, Acclaim, arri, ASTS, AVAB, CEM, CEM+, Congo, CongoJr, cRRFU, DAS, Dimmer, Distribution, DMX, ECMUX, Element, ELTS, Emphasis, Eos, ETCLink, Ethernet, Express, Expression, GCE, Idea, Ion, Irideon, K96, KnowledgeBase, Legacy Unison, LMI, Lon, MDD, MDR, MicroII, MicroVision, MIDI, MPE, NCE, Net2, Net3, Obsession, ObsessionII, Pharos, RDM, Response, RFR, RFU, RRFU, RS-232, RVI, Sensor, Sensor+, SineWave, SmartBar, SmartFade, SmartFadeML, SmartModule, SMPTE, Source Four, Source4, Touchscreen, Unison, Vision, WRFU
-
To upgrade a Designer console from LMI protocol to DMX protocol, the following parts are needed. 2ea J809 5F XLR Conns 1ea Z118 2732 1ea Z354 27128 1ea 1030B5002 Proc. PCB Rev E* 1ea 1030B5003 Patch PCB Rev D* *If the PCBs in the console are these versions, they are OK to use. The version is on the solder...
-
Pinout 4 Pin XLR Pin Signal 1 Data + 2 Data - 3 Clock + 4 Clock -
-
The RD-2033 module controls the power regulation for the rack. The RD-2031B Module is your signal converter card. This card converts your incoming console control signal (either DMX or LMI protocol) into a control protocol called Micro2 which is used by the RD-2034 modules to turn the lights on and off...
-
On L86 dimmer modules, there are two versions of the torroid holder. The old style is a "X" shape (ETC P/N 1086A3040). The new style is a "flat bar" shape (ETC P/N 7050A4024), which is the same as the Sensor modules. These two types are not interchangeable; the length of the bolt...
-
There are a couple of styles of SD12000 dimmers. The "old" style used two cubes mounted to the heat sink. We no longer have any of these old cubes, nor can we get any more. If a customer calls requesting new power cubes for their SD-12000 dimmer, you must determine if it is a "old"...
-
Please find the CH-200 user manual attached to this article. 7041.CH_200_MANUAL_001.pdf
-
Information Attached 8831.DESIGNER__MANUAL_001.pdf
-
In 1998, ETC was unable to find a source for the old circuit breakers (ETC P/N CB123) used in L86 2.4K dimmer modules. In order to continue manufacturing and service of the modules, ETC redesigned the front panel of the dimmer modules using the same breakers as Sensor D20 modules (ETC P/N CB166). These...