-
When equipment goes bad out in the field, it's often extremely helpful if the owner/end user can keep track of the circumstances of the failure. This is especially true when the problem is intermittent and might not occur when the technician is present. Service Technicians are exceptionally skillful...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
08-24-2009
Filed under: AAS, Acclaim, arri, ASTS, AVAB, CEM, CEM+, Congo, CongoJr, cRRFU, DAS, Dimmer, Distribution, DMX, ECMUX, Element, ELTS, Emphasis, Eos, ETCLink, Ethernet, Express, Expression, GCE, Idea, Ion, Irideon, K96, KnowledgeBase, Legacy Unison, LMI, Lon, MDD, MDR, MicroII, MicroVision, MIDI, MPE, NCE, Net2, Net3, Obsession, ObsessionII, Pharos, RDM, Response, RFR, RFU, RRFU, RS-232, RVI, Sensor, Sensor+, SineWave, SmartBar, SmartFade, SmartFadeML, SmartModule, SMPTE, Source Four, Source4, Touchscreen, Unison, Vision, WRFU
-
The range of allowable settings is typically limited to the range 0 to 1,000. The following elements are limited to 1,000: Maximum number of presets per room. Maximum number of sequences per room. Maximum number of templates (per template type). Maximum number of event lists per room (with each list...
-
3.4 square feet for remote head units.
-
Please note that this is the diameter of the gobo in the indexing gobo wheel. The diameter is: 7/8" or 22mm ETC ships with Glass gobos. Metal gobos can be used, but may burn based on how much of the aperture they cover.
-
Question Can I mount an AR6 vertically? Answer Yes, but only if the mirror points down and the fans are up. In other words, the mirror should be closer to the floor and the fans should be closer to the ceiling. If the fixture is mounted with the mirror up, the fixture runs the risk of overheating.
-
Question What is the lamp life of Irideon Fixtures? Answer AR50 Lamps 50 watt lamp -- ETC Part Number: RT168 -- 3000 Hour Lamp Life 35 watt lamp -- ETC Part Number: RT147 -- 5000 Hour Lamp Life AR6 Lamps 100 watt Tunsten Halogen --ETC Part Number: RT150 -- 2000 Hour Lamp Life 150 watt Metal Halide -...
-
Cannot connect PC to MCP. Are the 5 volt and 24 volt LEDs on? No- Check input voltage to the MCP. Yes- Continue to the next line. Are the other LEDs operating normally? No- Unplug the output connections at the MCP. If the MCP begins to operate normally, you have a DC wiring problem and need to check...