-
When equipment goes bad out in the field, it's often extremely helpful if the owner/end user can keep track of the circumstances of the failure. This is especially true when the problem is intermittent and might not occur when the technician is present. Service Technicians are exceptionally skillful...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
08-24-2009
Filed under: AAS, Acclaim, arri, ASTS, AVAB, CEM, CEM+, Congo, CongoJr, cRRFU, DAS, Dimmer, Distribution, DMX, ECMUX, Element, ELTS, Emphasis, Eos, ETCLink, Ethernet, Express, Expression, GCE, Idea, Ion, Irideon, K96, KnowledgeBase, Legacy Unison, LMI, Lon, MDD, MDR, MicroII, MicroVision, MIDI, MPE, NCE, Net2, Net3, Obsession, ObsessionII, Pharos, RDM, Response, RFR, RFU, RRFU, RS-232, RVI, Sensor, Sensor+, SineWave, SmartBar, SmartFade, SmartFadeML, SmartModule, SMPTE, Source Four, Source4, Touchscreen, Unison, Vision, WRFU
-
Manuals Emphasis User Manual Emphasis ETCNet2 Wireless Remote Focus Unit (WRFU) Express/Expression/Emphasis Radio Remote Focus Unit (RRFU) Express/Expression/Emphasis Remote Focus Unit (RFU) Knowledge Base: Emphasis 1.8 Key Cap Replacement Kit Emphasis Displays Only the Emphasis and Data Mode Emphasis...
-
From our testing, Strand SN110 nodes seem to require a 6 millisecond idle time after the last stop bit. In order for ETC consoles and DMX nodes and gateways to send DMX to them you must set their DMX Output speed to "slow". A deep clear or reset will change this to "fast", so the...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
07-27-2009
Filed under: Congo, CongoJr, DMX, Element, Emphasis, Eos, Express, Expression, Ion, KnowledgeBase, Net2, Net3, Obsession, ObsessionII, SmartFade, SmartFadeML
-
Default IP configuration by product Product IP Address Subnet Mask Gateway IP Unison 10.101.10.101 255.255.0.0 10.101.10.101 Obsession Primary RPU 10.101.30.101 255.255.0.0 10.101.30.101 DMX Node 10.101.0.99 255.255.0.0 0.101.0.99 Default subnet mask and gateway Item Value Subnet Mask 255.255.0.0 Default...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
07-27-2009
Filed under: CEM+, Congo, CongoJr, DMX, Element, Emphasis, Eos, GCE, Ion, KnowledgeBase, Legacy Unison, Net2, Net3, Obsession, ObsessionII, Sensor+, Unison, WRFU
-
Attached is a spreadsheet that will allow you to map out your DMX to EMDX addresses based on universe number. 3632.EDMX_Translation_Charts.xls
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
07-24-2009
Filed under: CEM+, Congo, CongoJr, Element, Emphasis, Eos, Ion, KnowledgeBase, Legacy Unison, ObsessionII, Sensor+, Unison
-
The Windows logo key, located in the bottom row of most computer keyboards is a little-used treasure. Don't' ignore it. It is the shortcut anchor for the following commands: Windows: Display the Start menu Windows + D Minimize or restore all windows Windows + E Display Windows Explorer Windows...
-
How to save an Emphasis show file for use in an Expression/Express running software version 3.1 In order for this to work, before saving as 3.1, the Emphasis showfile must be modified to be able to fit into the destination console. This includes setting channel and dimmer counts in the system settings...
-
To globally change the Report Header If the file is created in R8: Go to any report Go to Redesign Headings Make the changes that you need Save the File Select Yes to save globally If the file is created in a version earlier than R8: Go to any report Go to Redesign Headings Change the Title of the report...
-
Problem: The menu bar in Emphasis has disappeared. What causes it: You can grab and move the menu bar so it is in a separate window. If that window gets moved off the screen, you can't grab it back. Solution: To get the menu bar back, you will have to edit the registry in Windows. Here are the steps...
-
An Emphasis server should be rebooted about once a month to clear out any temp windows files that build up from Wysiwyg.