-
Manuals Net3 Radio Focus Remote Setup Guide Net3 RFR Gateway Configuration Editor (GCE) Knowledge Base: Net3 Radio Focus Remote (RFR) Setup On Congo Net3 RFR Base Station LED States ETC Network IP Addresses Charging Batteries for the Net3 Radio Focus Remote (RFR) Help Your Technician Help you
-
How to update Eos / Ion / Element software: step 1) Download the latest software and release notes from the ETC website at etcconnect.com . Open the zip file and save its files to a USB drive. ( Note: There may be both Console software and Offline/Client software. To update an Eos/Ion/Element console...
-
Manuals Element User Manual Element Net3 Radio Focus Remote (RFR) Gateway Configuration Editor (GCE) Touchscreen Monitors Related Links: Why Did My Console Do That? Knowledge Base: Common Effects and How to Program Them on Eos, Ion, and Element Eos/Ion/Element client and Windows Vista Eos/Ion Serial...
-
Here are some examples of how to achieve these common effects. These examples will be with channels 1 thru 10. Here are some common intensity effects: 1.) Simple intensity chase a. Create new effect 1, make it step based b. Step 1 thru 10 have channels 1 thru 10 c. In live, type [group][effect][1][enter...
-
Console Onboard VGA DVI 1 DVI 2 DVI 3 EOS - VGA & DVI VGA & DVI VGA & DVI Eos RPU Not Functional VGA & DVI VGA & DVI - Ion Console (Old & New) [*] VGA DVI DVI - *See Note Below ION RPU Not Functional VGA & DVI VGA & DVI - Element VGA DVI DVI - Net 3 RVI Not Functional...
-
Eos, Ion, Element, and Eos/Ion RPUs support external touchscreens, as do Congo, Congo jr, and Congo Lightserver running version 5+ software. There are two options for acquiring touchscreens: ETC stocks a touchscreen (part # M231) available through ETC dealerships. Some ELO touchscreens are compatible...
-
If you are having trouble connecting an Eos/Ion/Element client pc running Windows Vista to the master console (and you can ping the console), make sure the Service Location Protocol is 'Started' and 'Automatic'. To do this: Right-click on the 'My Computer' icon on the desktop...
-
Console Settings Eos, Ion and Element output both Net2 (EDMX) and Net3 (sACN/E1.31) levels via ethernet. As these protocols are enabled by default, you will likely not need to enable them in the Settings menu of the Eos/Ion/Element welcome screen. Open the Settings menu, then navigate to the Network...
-
When equipment goes bad out in the field, it's often extremely helpful if the owner/end user can keep track of the circumstances of the failure. This is especially true when the problem is intermittent and might not occur when the technician is present. Service Technicians are exceptionally skillful...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
08-24-2009
Filed under: AAS, Acclaim, arri, ASTS, AVAB, CEM, CEM+, Congo, CongoJr, cRRFU, DAS, Dimmer, Distribution, DMX, ECMUX, Element, ELTS, Emphasis, Eos, ETCLink, Ethernet, Express, Expression, GCE, Idea, Ion, Irideon, K96, KnowledgeBase, Legacy Unison, LMI, Lon, MDD, MDR, MicroII, MicroVision, MIDI, MPE, NCE, Net2, Net3, Obsession, ObsessionII, Pharos, RDM, Response, RFR, RFU, RRFU, RS-232, RVI, Sensor, Sensor+, SineWave, SmartBar, SmartFade, SmartFadeML, SmartModule, SMPTE, Source Four, Source4, Touchscreen, Unison, Vision, WRFU
-
From our testing, Strand SN110 nodes seem to require a 6 millisecond idle time after the last stop bit. In order for ETC consoles and DMX nodes and gateways to send DMX to them you must set their DMX Output speed to "slow". A deep clear or reset will change this to "fast", so the...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
07-27-2009
Filed under: Congo, CongoJr, DMX, Element, Emphasis, Eos, Express, Expression, Ion, KnowledgeBase, Net2, Net3, Obsession, ObsessionII, SmartFade, SmartFadeML