testing another attachment:
4401.gvim.reg
0131.ASTS.EC1.edrw
How to update Eos / Ion / Element software:
step 1)
Download the latest software and release notes from the ETC website at
etcconnect.com and save it to a USB drive. (
Note: There may be both Console software and Offline/Client software. To update an Eos/Ion/Element console or an Eos/Ion RPU, or a Net3 RVI's Eos/Ion mode you will need the console software. If you use a client PC to connect to the system, you should also download the offline/client update and install it on that machine.)
(
Note: Check the Release Notes for any special instructions about installation.)
step 2) Go to the system shell.
a. If you are currently in the console application, this may be accomplished by choosing "Exit Eos" (or "Exit Ion"/"Exit Element") from the browser menu.
b. If you are currently rebooting the console, you can reach the shell by clicking on the "Launching in …" countdown box.
step 3) Insert the USB drive with the console software into an open USB port.
step 4) Select {Settings} from the main shell menu.
step 5) Select {General} This is on the RIGHT hand side of the screen.
step 6) Scroll down and select {Software Update}. This is on the LEFT hand side of the screen.
step 7) Answer any on-screen questions and follow any on-screen instructions.