-
Manuals SmartFade ML User Manual Fixture Library (7.5.3) Beta Fixture Libraries SmartFade ML Knowledge Base: How Much Energy Does a Smartfade Consume? SmartFade ML Unknown Device Drive Error SmartSoft under Windows 8 SmartFade SmartSoft Compatibility Balancing LED Colors on the Smartfade ML. Problems...
-
This page applies to SmartSoft under Windows 8 only When connecting a SmartFade or SmartFade ML to a PC running Windows 8, the operating system will block the installation of the drivers as Windows 8 now requires all drivers to be 'signed' by a Microsoft associate. To install the drivers manually...
-
What is SmartSoft? SmartSoft is an online and offline viewer and editor for SmartFade and SmartFade ML Consoles. When used on its own, it allows you to simulate any of the SmartFade Consoles, which allows for creation, editing, and saving of shows. When used connected to a console, SmartSoft provides...
-
Deep-clearing a SmartFade or SmartFade ML console begins with your console powered off. Deep-Clear, bypassing self-tests The easy way, skipping all self-tests, is to follow steps 1-4 below, then press the [✔] button about once per second until the console enters the memory test. Once the memory test...
-
SmartFade (non-ML) show files have changed format over the course of development. This means showfiles have a few stepping stones they need to pass through to maintain compatibility. The procedure listed below should help you upgrade a show file to current software. If the console is currently running...
-
The SmartFade ML has RGB LED indicators that are factory calibrated to a white mix. Due to manufacturing differences in LEDs, there may be a need to recalibrate the LED button colors on your console so that "white" is actually white. This can be done (as of software v2.0) in the [Setup] menu...
-
This article has been merged into another page. Please see: KnowledgeBase: Balancing LED Colors on the Smartfade ML .
-
When equipment goes bad out in the field, it's often extremely helpful if the owner/end user can keep track of the circumstances of the failure. This is especially true when the problem is intermittent and might not occur when the technician is present. Service Technicians are exceptionally skillful...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
08-24-2009
Filed under: AAS, Acclaim, arri, ASTS, AVAB, CEM, CEM+, Congo, CongoJr, cRRFU, DAS, Dimmer, Distribution, DMX, ECMUX, Element, ELTS, Emphasis, Eos, ETCLink, Ethernet, Express, Expression, GCE, Idea, Ion, Irideon, K96, KnowledgeBase, Legacy Unison, LMI, Lon, MDD, MDR, MicroII, MicroVision, MIDI, MPE, NCE, Net2, Net3, Obsession, ObsessionII, Pharos, RDM, Response, RFR, RFU, RRFU, RS-232, RVI, Sensor, Sensor+, SineWave, SmartBar, SmartFade, SmartFadeML, SmartModule, SMPTE, Source Four, Source4, Touchscreen, Unison, Vision, WRFU
-
From our testing, Strand SN110 nodes seem to require a 6 millisecond idle time after the last stop bit. In order for ETC consoles and DMX nodes and gateways to send DMX to them you must set their DMX Output speed to "slow". A deep clear or reset will change this to "fast", so the...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
07-27-2009
Filed under: Congo, CongoJr, DMX, Element, Emphasis, Eos, Express, Expression, Ion, KnowledgeBase, Net2, Net3, Obsession, ObsessionII, SmartFade, SmartFadeML
-
There is a known bug in the Elation DesignWash 250 personality in the SmartFade ML version 2.1 personality library. The closest working thing is the Elation DesignWash 575E although it uses a few more DMX channels that the enduser will need to skip. If the installation can’t afford to skip those...