-
Manuals SmartFade User Manual SmartFade Knowledge Base: How do I Record a Stack on a Smartfade Console? How Much Energy Does a Smartfade Consume? How To Deep-Clear a SmartFade Console SmartFade SmartSoft Compatibility SmartFade Show Compatibility Problems with Strand SN110 node receiving DMX Help Your...
-
This page applies to SmartSoft under Windows 8 only When connecting a SmartFade or SmartFade ML to a PC running Windows 8, the operating system will block the installation of the drivers as Windows 8 now requires all drivers to be 'signed' by a Microsoft associate. To install the drivers manually...
-
What is SmartSoft? SmartSoft is an online and offline viewer and editor for SmartFade and SmartFade ML Consoles. When used on its own, it allows you to simulate any of the SmartFade Consoles, which allows for creation, editing, and saving of shows. When used connected to a console, SmartSoft provides...
-
Deep-clearing a SmartFade or SmartFade ML console begins with your console powered off. Deep-Clear, bypassing self-tests The easy way, skipping all self-tests, is to follow steps 1-4 below, then press the [✔] button about once per second until the console enters the memory test. Once the memory test...
-
SmartFade (non-ML) show files have changed format over the course of development. This means showfiles have a few stepping stones they need to pass through to maintain compatibility. The procedure listed below should help you upgrade a show file to current software. If the console is currently running...
-
When equipment goes bad out in the field, it's often extremely helpful if the owner/end user can keep track of the circumstances of the failure. This is especially true when the problem is intermittent and might not occur when the technician is present. Service Technicians are exceptionally skillful...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
08-24-2009
Filed under: AAS, Acclaim, arri, ASTS, AVAB, CEM, CEM+, Congo, CongoJr, cRRFU, DAS, Dimmer, Distribution, DMX, ECMUX, Element, ELTS, Emphasis, Eos, ETCLink, Ethernet, Express, Expression, GCE, Idea, Ion, Irideon, K96, KnowledgeBase, Legacy Unison, LMI, Lon, MDD, MDR, MicroII, MicroVision, MIDI, MPE, NCE, Net2, Net3, Obsession, ObsessionII, Pharos, RDM, Response, RFR, RFU, RRFU, RS-232, RVI, Sensor, Sensor+, SineWave, SmartBar, SmartFade, SmartFadeML, SmartModule, SMPTE, Source Four, Source4, Touchscreen, Unison, Vision, WRFU
-
From our testing, Strand SN110 nodes seem to require a 6 millisecond idle time after the last stop bit. In order for ETC consoles and DMX nodes and gateways to send DMX to them you must set their DMX Output speed to "slow". A deep clear or reset will change this to "fast", so the...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
07-27-2009
Filed under: Congo, CongoJr, DMX, Element, Emphasis, Eos, Express, Expression, Ion, KnowledgeBase, Net2, Net3, Obsession, ObsessionII, SmartFade, SmartFadeML
-
The Smartfade is very energy efficient. It's average energy consumption is 8 Watts and peak consumption is 15 Watts. If the user is looking to replace the power supply, please follow these guidelines: 800mA 12V AC/DC to 1.2A 12V AC/DC peak . 15V DC max . 12V AC max . Input is AC or DC capable. The...
-
To record the stack: Press “Stack” (stack button will light) Press “Record Sequence” Press “Stack” Press each of your memories that you want to be included in the Stack. Press “Record Sequence” Your stack is now recorded.