-
Pin A Yellow Phase T Pin 3 Red Phase S Pin 7 Black Phase R Pin 8 Brown Fan
-
Question: Can you mount the Sensor Door on the opposite corner of the front of the rack? Answer: No, the door must be hung from the left side.
-
On older Sensor Touring Racks, prior to 1995, there was a protection fuse on the power test points. The fuse holder caps can be damaged or lost easily. Part Number Description X107 FUSEHOLDER; 34887 SQUARE X108 FUSECAP; BLACK X109 FUSECAP; RED X110 FUSECAP; BLUE F102 FUSE 2A 3AG FAST 312.002 LFU Note...
-
Problem: Dimmers set to switched mode will not shut off. Answer: Sensor 3.1 had a software bug that held dimmers in switched mode to 15 percent. This was fixed in 3.11 software. Workaround: Set non-motorized loads to non-dim. Sites using motors on d20's should think about using R20s regardless of...
-
Problem: CEM displays Illegal Scale Error Message. Answer: Cause Can be the result of some corruption in the config, but does not impede system operation. Seems to be prevalent in large linked systems or CUDI systems Workaround / Fix There are many things that can make the message go away, but none of...
-
Question: How do I terminate ETCLink on a Sensor backup station? Answer: Insert jumpers on J5 A and B
-
Question: I did a rack to rack transfer on one CEM in my system. Now the rest of the CEMs say CONFIG MISMATCH. What did I do wrong? Answer: Sometimes in multi-rack system when you do a rack to rack transfer; once that is complete the rest of the CEMs in the system think there is a new config on the CEM...
-
Question: Where do I find the test switch on my CEM? Answer: It is the red switch on the PCB just behind the Keypad of the front panel.
-
Question: Can a standard D20 dimmer double, or is a special module needed? Answer: A standard D20 is what is need in the rack to dimmer double. Besides the D20 you will need a dimmer doubler cable and 77V lamps in units that are connected to the dimmer doubler. You will also need to set the rack and...
-
SEE ATTACHMENT: 8053.Color_Touring_Rack_Cut_Sheet.pdf