-
Manuals Emphasis User Manual 8053.Emphasis User Manual Addendum RevA 2002.pdf 6305.Emphasis User Manual Addendum v1.0.0 RevA 2002.pdf 5633.Emphasis User Manual Supplement v1.0.0 RevA 2002.pdf 4336.Emphasis User Manual Supplement v1.8.0 RevA 2004.pdf 0116.Emphasis User Manual v1.0.0 RevA 2002.pdf 5226...
-
RFR with Congo/CongoJr Also see: Getting Started with Congo/CongoJr The iRFR has the same functionality as the Net3 RFR. The RFR works within its own field and this field can be cleared from the console. All channel intensity levels generated by the remote can only be recorded into targets from the remote...
-
I. Connecting to Your Console NOTE: If you have not already setup your console's wireless network and configured your iPhone/iPod to use that network, you need to start here: iRFR: How to Setup Your Wireless Network 1. On your console, you will need to enable iRFR support (off by default). In the...
-
If your RFU doesn't turn on, check the following: Check to see of RFU works in another location Plug the RFU directly into the back of the console (as opposed to a remote node). Make sure both (console and RFU) units are turned on and plugged in. Check the 1.6A fuse on the back of the console labeled...
-
Older Consoles RFU The Remote Focus Unit (commonly called an RFU, pronounced arr-foo For pronunciation help please see http://www.talklikeapirate.com/ ) for older consoles is a "riggers remote" control that allows basic remote control of the desk, to allow for turning channels on and off during...
-
I. Network Configuration The iRFR requires that your console be on a wireless network. Below are a couple examples of how you may choose to configure your wireless network: *NOTE: Your lighting network should never have a direct connection to the internet. It is also critical that the wireless component...
-
iRFR Documentation I. How to Setup Your Wireless Network II. Getting Started with Eos/Ion/Element III. Getting Started with Congo/CongoJr iRFR: Congo/CongoJr Functionality *Requires iPod/iPhone OS 3.0
-
Manuals Obsession II User Manual Obsession II Facepanel Obsession II SPS The Obsession II (Obsession 2) console was the successor to the Obsession 1, and was similar from a programming point of view. Obsession2 is a natively tracking console. Obsession II systems are natively networked; each system has...
-
Manuals Obsession User Manual 6646.Obsession 600 User Manual v2.1.0 1994.pdf 5228.Obsession 600 User Manual v2.3.0 1995.pdf 6305.Obsession User Manual v2.1.0 1994.pdf 1033.Obsession User Manual v2.3.0 1995.pdf 8865.Obsession User Manual v2.4.0 1997.pdf 8867.Obsession Memory Upgrade Manual 1996.pdf 3175...
-
Question: Obsession I RFU communication PCB, there are two power fuses what is the second one for? Answer: The second one is spare on that PCB. The fuse is ETC part number F131, and the fuse holder is X146.