-
Family-Wide Articles Programming: Common Effects and How to Program Them on an Eos Family Console Updating Eos Family Software Connecting Eos/Ion/Element to a Visualiser Virtual Media Server File Formats Eos and Ion Screen Lockout Using Expand Mode On an RVI. (Eos/Ion) Fixtures and Fixture Libraries...
-
Manuals Net3 Radio Focus Remote Setup Guide Net3 RFR The Net3 RFR provides a wireless remote control for consoles supporting ETCNet3, which includes the Congo Family ( Congo , Congo Jr. , Congo Kid ) and the Eos Family ( Eos , Gio , Ion , and Element ). It features a network base station that can be...
-
When the RFR starts up, it can be put into a variety of different modes by holding down keys on the keypad. A summary of those modes is shown here. Key Function [More SK] Software Upgrade Mode • Screen Displays "Remote boot Version0.3" [Clear] RFR setup mode: Set frequency, net id, signal...
-
ETC recommends using rechargeable batteries. As with any rechargeable battery, we have found that these provide the best source of power and longest operating life when allowed to be fully discharged and then fully charged. Most users simply use the RFR and then plug it back into the recharger when done...
-
The Net3 Radio Focus Remote (RFR) base station has a single bi-color LED that indicates different states: Solid Green = powered and running Slow Irregular Blink Red/Green = wired or wireless data activity Rapid Regular Blink Red/Green = identify function (probably triggered by GCE - should timeout after...
-
When equipment goes bad out in the field, it's often extremely helpful if the owner/end user can keep track of the circumstances of the failure. This is especially true when the problem is intermittent and might not occur when the technician is present. Service Technicians are exceptionally skillful...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
08-24-2009
Filed under: AAS, Acclaim, arri, ASTS, AVAB, CEM, CEM+, Congo, CongoJr, cRRFU, DAS, Dimmer, Distribution, DMX, ECMUX, Element, ELTS, Emphasis, Eos, ETCLink, Ethernet, Express, Expression, GCE, Idea, Ion, Irideon, K96, KnowledgeBase, Legacy Unison, LMI, Lon, MDD, MDR, MicroII, MicroVision, MIDI, MPE, NCE, Net2, Net3, Obsession, ObsessionII, Pharos, RDM, Response, RFR, RFU, RRFU, RS-232, RVI, Sensor, Sensor+, SineWave, SmartBar, SmartFade, SmartFadeML, SmartModule, SMPTE, Source Four, Source4, Touchscreen, Unison, Vision, WRFU
-
There are a couple of specialized steps for setting up the Net3 RFR on Congo as opposed to Eos/Ion. On the handheld unit, find an available frequency and set the channel as described in the RFR setup guide. With the base station plugged into the Congo go into [System Settings] from the Heartbeat screen...