-
This is one of the first steps in the process of transferring information from a primary processor to a secondary processor in a DPS system. This step syncs up the hard drives in both processors.
-
Obsession offline is fully functional within Virtual PC, versions 4.0 and greater.
-
This instruction set will explain how to turn your Obsession 4.4 Software kits into 4.4.2 kits. Rather than send out completely new kits it was decided to send this instruction sheet, the 4.4.2 disk set, the 4.4.2 installation instructions, 4.4.2 release notes and new stickers for box and folder. Make...
-
Obsession Facepanels can be configured through their internal software, but changing the processor unit requires a bit more work. To set the IP address on the processor, go to DOS and go into the ETC directory. Type: edit config.dat and press enter. If the following lines are there, change them to your...
-
Symptom: None of the keys on the keyboard including GO and Stop/Back. However submasters seem to work normally. Cause: Someone has reset the Face Panel to operate in Submaster Mode. Because a Submaster Panel doesn't have a keyboard, the unit does not respond to keyboard input. Resolution: Reboot...
-
We have seen several reports where someone has taken a show disk saved from their Obsession II System and when they place the disk into their laptop to load it into Off-line, the computer will display a virus error. Rest assured there are no viruses on your Obsession system. The file format used for...
-
There is a printer port on the back of the Obsession II facepanel clearly marked "parallel printer". ETC has received calls by customers reporting that the printer does not work when plugged into the console. Many of those situations had been incorrectly reported as printer problems. Unfortunately...
-
Information Attached 3731.Obs2_v42_release_notes.pdf
-
The best option is to replace the card with the current 3Com card (part number M841) and also get the packet driver update kit (part number 4152S1014). We currently use the 3Com 3c900-CMB card with the 3C90XPD.COM driver version 4.0d located in the C:\ETC directory on the Obsession II remote processor...
-
Obsession II 4.1 code was very limited in its release. Attached you will find this user manual. 8831.OBS2_USER_V41.PDF