-
Product Line: Obsession family of consoles Description: System software version 3.1.2 Engineering Change Order (ECO): 3461 Effective Date: 3/18/98 Version 3.1.2 is a software upgrade for Obsession consoles that meet all the requirements specified below. Consoles that do not meet these requirements can...
-
To set up the Obsession 1 CMOS: You may need to re-setup the CMOS/BIOS of the console if it boots to a CMOS or hard drive error. The battery that maintains the memory for the CMOS may have discharged, causing the CMOS data in the console to be lost. Use the following steps to input that data. The battery...
-
Default IP Ranges For ETC Products Below are the ETC Network addressing standards. Bold numbers or modes are the default for devices that ship with a preconfigured IP. These standard ranges should be used unless a different range is required by the site. ETC Product IP Range Congo 10.101.80.101 to 10...
Posted to
ETC Product Wiki
by
Tracy.Fitch
on
08-26-2011
Filed under: CEM+, CEM3, Congo, Congo Kid, CongoJr, DMX, Element, Emphasis, Eos, Ethernet, Gateway Configuration Editor, GCE, Ion, iphone, ipod, iRFR, IRFU, KnowledgeBase, Legacy Unison, Light Server, Mosaic, NCE, Net2, Net3, Network, Obsession, ObsessionII, Paradigm, Pharos, Sensor+, Show Control, Unison, WRFU
-
Overview Endusers may need to get to DOS for several reasons, the most likely being to run OBSTRANS to uptranslate Obsession showfiles to newer versions. The method of getting there varies a bit depending on software version: In versions of Obsession and Obsession II code previous to 4.3 , performing...
-
To convert a showfile from OBSN1 to OBSN2: Exit to DOS using a keyboard and monitor connected directly to the OBSN2 processor. When the “C:\” comes up type “obstrans” and hit [ENTER] to get to the Show Translator Menu. Put the OBSN1 show file disk into the processor disk drive...
-
Question Can I Convert an Obsession Showfile to an Express/Expression 3 Showfile? Answer Short answer: Yes-ish. These consoles operate in very different ways--one is a tracking console, one is a cue-only console. They handle effects differently as well. Using the most recent version of Obsession Offline...
-
Manuals Obsession User Manual 6646.Obsession 600 User Manual v2.1.0 1994.pdf 5228.Obsession 600 User Manual v2.3.0 1995.pdf 6305.Obsession User Manual v2.1.0 1994.pdf 1033.Obsession User Manual v2.3.0 1995.pdf 8865.Obsession User Manual v2.4.0 1997.pdf 8867.Obsession Memory Upgrade Manual 1996.pdf 3175...
-
Question: Obsession I RFU communication PCB, there are two power fuses what is the second one for? Answer: The second one is spare on that PCB. The fuse is ETC part number F131, and the fuse holder is X146.
-
Obsession Off-Line 2.4.2 Web Installation for Windows 95/98 Save the Obsession Off-Line installer to your hard drive. From where you saved it, double-click the installer's icon. The installer is called ObsOf242.exe. The "Unzip to folder" path will default to "C:\". Do not change...
-
A failure in the CMOS battery can often be a cause for an ISA960 failure, requiring that CMOS settings be reset and the battery replaced . As of Obsession 5.1.1 software (Obsession II only), the console included an automatic CMOS configuration program (accessed by typing OBSNCMOS in the DOS prompt)....