-
Default IP Ranges For ETC Products Below are the ETC Network addressing standards. Bold numbers or modes are the default for devices that ship with a preconfigured IP. These standard ranges should be used unless a different range is required by the site. ETC Product IP Range Congo 10.101.80.101 to 10...
Posted to
ETC Product Wiki
by
Tracy.Fitch
on
06-18-2013
Filed under: CEM+, CEM3, Congo, Congo Kid, CongoJr, DMX, Element, Emphasis, Eos, Ethernet, Gateway Configuration Editor, GCE, Ion, iphone, ipod, iRFR, IRFU, KnowledgeBase, Legacy Unison, Light Server, Mosaic, NCE, Net2, Net3, Network, Obsession, ObsessionII, Paradigm, Pharos, Sensor+, Show Control, Unison, WRFU
-
Family-Wide Articles Programming: Common Effects and How to Program Them on an Eos Family Console Updating Eos Family Software Connecting Eos/Ion/Element to a Visualiser Virtual Media Server File Formats Eos and Ion Screen Lockout Using Expand Mode On an RVI. (Eos/Ion) Fixtures and Fixture Libraries...
-
Manuals Net3 Radio Focus Remote Setup Guide Net3 RFR The Net3 RFR provides a wireless remote control for consoles supporting ETCNet3, which includes the Congo Family ( Congo , Congo Jr. , Congo Kid ) and the Eos Family ( Eos , Gio , Ion , and Element ). It features a network base station that can be...
-
Setup Guides Net3 Remote Video Interface (RVI) Setup Guide Net3 Remote Video Interface (RVI) Net3 Radio Focus Remote (RFR) Gateway Configuration Editor (GCE) ETCNet2 Network Configuration Editor (NCE) Touchscreen Monitors Related Links: Eos Family Eos Lighting Console Gio Lighting Console Ion Lighting...
-
Gateway Configuration Editor (GCE) can be installed on any Eos Family console. In most cases, GCE will be pre-installed with the console, however some early images did not have GCE or may an older version. It can be installed or updated at any time. GCE is a useful tool used to configure Net3 DMX RDM...
-
When the RFR starts up, it can be put into a variety of different modes by holding down keys on the keypad. A summary of those modes is shown here. Key Function [More SK] Software Upgrade Mode • Screen Displays "Remote boot Version0.3" [Clear] RFR setup mode: Set frequency, net id, signal...
-
When equipment goes bad out in the field, it's often extremely helpful if the owner/end user can keep track of the circumstances of the failure. This is especially true when the problem is intermittent and might not occur when the technician is present. Service Technicians are exceptionally skillful...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
08-24-2009
Filed under: AAS, Acclaim, arri, ASTS, AVAB, CEM, CEM+, Congo, CongoJr, cRRFU, DAS, Dimmer, Distribution, DMX, ECMUX, Element, ELTS, Emphasis, Eos, ETCLink, Ethernet, Express, Expression, GCE, Idea, Ion, Irideon, K96, KnowledgeBase, Legacy Unison, LMI, Lon, MDD, MDR, MicroII, MicroVision, MIDI, MPE, NCE, Net2, Net3, Obsession, ObsessionII, Pharos, RDM, Response, RFR, RFU, RRFU, RS-232, RVI, Sensor, Sensor+, SineWave, SmartBar, SmartFade, SmartFadeML, SmartModule, SMPTE, Source Four, Source4, Touchscreen, Unison, Vision, WRFU
-
From our testing, Strand SN110 nodes seem to require a 6 millisecond idle time after the last stop bit. In order for ETC consoles and DMX nodes and gateways to send DMX to them you must set their DMX Output speed to "slow". A deep clear or reset will change this to "fast", so the...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
07-27-2009
Filed under: Congo, CongoJr, DMX, Element, Emphasis, Eos, Express, Expression, Ion, KnowledgeBase, Net2, Net3, Obsession, ObsessionII, SmartFade, SmartFadeML