-
The type of MSC (Midi Show Control) commands Eos, Ion, and Element can take or send are very specific and preprogrammed into the software. The literal information is transmitted via a special language called a "hexadecimal string." In particular, Midi Show Control is a subset of the MIDI standard...
-
SMPTE is not directly supported on the Express line of control consoles. However, the Express line does support ETC MIDI , MIDI Show Control (MSC) and MIDI Time Code so it's possible to use SMPTE with an Express console if you use a SMPTE to MIDI generator. Enable the type of MIDI you wish to use...
-
When equipment goes bad out in the field, it's often extremely helpful if the owner/end user can keep track of the circumstances of the failure. This is especially true when the problem is intermittent and might not occur when the technician is present. Service Technicians are exceptionally skillful...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
08-24-2009
Filed under: AAS, Acclaim, arri, ASTS, AVAB, CEM, CEM+, Congo, CongoJr, cRRFU, DAS, Dimmer, Distribution, DMX, ECMUX, Element, ELTS, Emphasis, Eos, ETCLink, Ethernet, Express, Expression, GCE, Idea, Ion, Irideon, K96, KnowledgeBase, Legacy Unison, LMI, Lon, MDD, MDR, MicroII, MicroVision, MIDI, MPE, NCE, Net2, Net3, Obsession, ObsessionII, Pharos, RDM, Response, RFR, RFU, RRFU, RS-232, RVI, Sensor, Sensor+, SineWave, SmartBar, SmartFade, SmartFadeML, SmartModule, SMPTE, Source Four, Source4, Touchscreen, Unison, Vision, WRFU
-
Pin Signal 1 N/C 2 Ground 3 N/C 4 Data + 5 Data -
-
When triggering a Wholehog using Midi Show Control (MSC) you can monitor the data stream and read the incoming MSC data string by going into Control Panel on the Hog and pressing Event Monitor. Event Monitor can show what's coming into the console via MIDI or Time code. To get the Hog to do a Go...
-
Here are the valid MSC parameter ranges that we allow for both the Obsession and Expression lines. Neither console will respond to a 7F "all device" command format. Labels shown within angle brackets <> can be set. Values shown in hexadecimal must not be changed. Obsession Format: Obsession...