-
Many ETC products provide timed event capabilities and may be affected by the 2007 adjustments to US Daylight Saving Time enacted with the Energy Policy Act of 2005. See the ETC Daylight Saving reference page for more information on what steps to take with your individual product
-
The legacy Unison remote and Unison Heritage remote are the same hardware, however some changes were made to the remote and button placement that will affect their functionality. Both remotes are compatible with Legacy Unison hardware, however the Heritage remote must be used for Unison Paradigm systems...
-
We often get asked about wire temperature ratings and how they relate to dimmer rack wiring and the allowable number of circuits in a conduit or wireway. While the ultimate authority on wire size, temperature ratings, and conduit fill is the project electrical engineer, and then the local inspector,...
-
When equipment goes bad out in the field, it's often extremely helpful if the owner/end user can keep track of the circumstances of the failure. This is especially true when the problem is intermittent and might not occur when the technician is present. Service Technicians are exceptionally skillful...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
08-24-2009
Filed under: AAS, Acclaim, arri, ASTS, AVAB, CEM, CEM+, Congo, CongoJr, cRRFU, DAS, Dimmer, Distribution, DMX, ECMUX, Element, ELTS, Emphasis, Eos, ETCLink, Ethernet, Express, Expression, GCE, Idea, Ion, Irideon, K96, KnowledgeBase, Legacy Unison, LMI, Lon, MDD, MDR, MicroII, MicroVision, MIDI, MPE, NCE, Net2, Net3, Obsession, ObsessionII, Pharos, RDM, Response, RFR, RFU, RRFU, RS-232, RVI, Sensor, Sensor+, SineWave, SmartBar, SmartFade, SmartFadeML, SmartModule, SMPTE, Source Four, Source4, Touchscreen, Unison, Vision, WRFU
-
Question Within Legacy Unison Light Manager, I see a dialog appear titled "P80" with the text "The Win 16 Subsystem has insufficient resources to continue running. Click on OK, close your applications, and restart your machine." This error might occur frequently, and cause the software...
-
Default IP configuration by product Product IP Address Subnet Mask Gateway IP Unison 10.101.10.101 255.255.0.0 10.101.10.101 Obsession Primary RPU 10.101.30.101 255.255.0.0 10.101.30.101 DMX Node 10.101.0.99 255.255.0.0 0.101.0.99 Default subnet mask and gateway Item Value Subnet Mask 255.255.0.0 Default...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
07-27-2009
Filed under: CEM+, Congo, CongoJr, DMX, Element, Emphasis, Eos, GCE, Ion, KnowledgeBase, Legacy Unison, Net2, Net3, Obsession, ObsessionII, Sensor+, Unison, WRFU
-
Quick Summary: If you've got devices with electronics inside being powered from a dimmer in a sensor rack, set the firing mode to switched . If you're on a Unison rack, a SmartPack, a SmartBar, or a SmartModule, set the mode to non-dim What those options mean: Non-dim dimmers output regulated...
-
Module Information Summary This summary provides module information broken down by market and application. Four major market groups are used to separate modules: UL market – ETC Americas, 120v-60hz power, Sensor and Unison products CE market – ETC Europe, 230v-50hz power, Sensor CE and Unison...
-
Attached is a spreadsheet that will allow you to map out your DMX to EMDX addresses based on universe number. 3632.EDMX_Translation_Charts.xls
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
07-24-2009
Filed under: CEM+, Congo, CongoJr, Element, Emphasis, Eos, Ion, KnowledgeBase, Legacy Unison, ObsessionII, Sensor+, Unison
-
The control modules for Sensor and Unison are approved as Class 2 Devices. Please contact ETC Technical Support, at 800-688-4116 , if supporting documentation is required.