-
To convert a showfile from OBSN1 to OBSN2: Exit to DOS using a keyboard and monitor connected directly to the OBSN2 processor. When the “C:\” comes up type “obstrans” and hit [ENTER] to get to the Show Translator Menu. Put the OBSN1 show file disk into the processor disk drive...
-
This article has been merged into: KnowledgeBase: How To Exit to DOS on Obsession and Obsession II
-
Ion Monitor Arrangement If your console's software is version 1.9.5 or higher, please see the following wiki article for an updated process: Ion Monitor Arrangement After v.1.9.5 If you have two monitors plugged into your Ion (either two DVIs on the splitter or one DVI and one VGA), you may need...
-
Question Why does one of the USB ports on the front of the Dell Emphasis Server not work? Answer The USB port that is closest to the inside of the server inside the door on the front is used internally by the dongle that enables the software. If something is plugged into that port, transmission of EDMX...
-
Obsession Off-Line 2.4.2 Web Installation for Windows 95/98 Save the Obsession Off-Line installer to your hard drive. From where you saved it, double-click the installer's icon. The installer is called ObsOf242.exe. The "Unzip to folder" path will default to "C:\". Do not change...
-
The Obsession I motherboard (486) had two different manufacturers over the life of the product. The first motherboard was made by Sigma, and the other was manufactured by Teknor. See the picture below for the actual location of the battery on the two motherboards. Sigma Motherboards The Sigma motherboard...
-
These color codes apply to Belden 9729 and MOST equivalents. These color codes do not apply to Proplex. RFU: Pin 1: Red (of the red/black pair) Pin 2: Black (of the red/black pair) Pin 3: White (of the white/black pair) Pin 4: Black (of the white/black pair) Pin 5: Power - Pin 6: Power + See also: RFU...
-
The Express / Expression 3 Programming Quickguide for software version 3.1 is available as a download in the downloads section of our website. Please follow this Expression Insight v3.1 Quick Guide.pdf to the download.
-
If the console loses memory after being turned off for a short amount of time (less than a month), please call ETC or your local ETC Service Center in order to get the console in for repair. It is most likely a problem with the SRAM memory on the desk.
-
Expression Off-Line v3.1 gives you the option to merge showfiles. Normally when a show is read from disk into either Off-Line or the console, the current show in memory is erased. This prevents you from merging two shows together or reading portions of one show into another one. This barrier can be overcome...