-
The amount of heat generated by a phase control dimmer is determined in part by the load applied. Maximums based on the full rated load of a pack: per dimmer per dimmer pack 12 channel, 20 amp 30W/103BTUs 360W/1230BTUs 24 channel, 10 amp 60W/205BTUs 360W/1230BTUs Combined for a 4 pack touring rack, Maximum...
-
Both Portable and Wall Mount SmartPacks easily switch from single phase to three phase operation, or vice-versa, by moving the power feed wires from the L2 terminal in the pack to the L1 and L3 lugs on the power board. Each SmartPack ships with a document including illustrations for this purpose. A quick...
-
Quick Summary: If you've got devices with electronics inside being powered from a dimmer in a sensor rack, set the firing mode to switched . If you're on a Unison rack, a SmartPack, a SmartBar, or a SmartModule, set the mode to non-dim What those options mean: Non-dim dimmers output regulated...
-
The Amperes of In-rush Current rating for the pack is 10,000 for United States domestic units and 6,000 for European CE units.
-
Question What does the left-most switch do on the ETC Smartpack? Answer This switch turns off power to the control board within the Smartpack. This does not turn off voltage that is supplied to the pack through the feeder cable. If you are working with the pack's cover removed, you should absolutely...
-
Smartpack 6 Channel: 27.95lbs 12.68kgs Smartpack 12 Channel: 28.55lbs 12.95kgs You will need to add 3lbs to these numbers to get the shipping weight.
-
Smartpack Frequently Asked Questions Q. What are my power requirements? A. Single Phase configuration (two hots): 60A 120/240 VAC Three Phase configuration: 40A 120/208VAC Q. Within what voltage and hertz tolerances with the Smartpack operate? A. The pack's operating range is: 85-140 VAC, 47-63Hz...
-
You should verify the version of software within the pack. Upon reset of the unit, the software version will display. This version should be at least 1.0.7. If it is running an earlier version of code, this may the problem. You should get the serial number of the pack and call ETC Service at 1-800-688...