-
When equipment goes bad out in the field, it's often extremely helpful if the owner/end user can keep track of the circumstances of the failure. This is especially true when the problem is intermittent and might not occur when the technician is present. Service Technicians are exceptionally skillful...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
08-24-2009
Filed under: AAS, Acclaim, arri, ASTS, AVAB, CEM, CEM+, Congo, CongoJr, cRRFU, DAS, Dimmer, Distribution, DMX, ECMUX, Element, ELTS, Emphasis, Eos, ETCLink, Ethernet, Express, Expression, GCE, Idea, Ion, Irideon, K96, KnowledgeBase, Legacy Unison, LMI, Lon, MDD, MDR, MicroII, MicroVision, MIDI, MPE, NCE, Net2, Net3, Obsession, ObsessionII, Pharos, RDM, Response, RFR, RFU, RRFU, RS-232, RVI, Sensor, Sensor+, SineWave, SmartBar, SmartFade, SmartFadeML, SmartModule, SMPTE, Source Four, Source4, Touchscreen, Unison, Vision, WRFU
-
When looking for a monitor for the Expression (1) or MicroVision family of consoles you will be looking for a CGA monitor, which is an older video format that is not compatible with the current video formats (VGA_ or (SVGA). These consoles cannot be upgraded to the new video format, so you will either...
-
Digitizers, such as the Kurta tablet do not work reliably through ETC Net2 Nodes.
-
From our testing, Strand SN110 nodes seem to require a 6 millisecond idle time after the last stop bit. In order for ETC consoles and DMX nodes and gateways to send DMX to them you must set their DMX Output speed to "slow". A deep clear or reset will change this to "fast", so the...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
07-27-2009
Filed under: Congo, CongoJr, DMX, Element, Emphasis, Eos, Express, Expression, Ion, KnowledgeBase, Net2, Net3, Obsession, ObsessionII, SmartFade, SmartFadeML
-
Typical socketed chips that can be swapped to see if they are damaged. Power down console, swap chips, and restart. Location Purpose Type U93 DMX 1 Out 75176 U76 DMX 2 Out(Optional) 75176 U13 D192 Clock 75176 U76 Spare 75176 U13 Spare 75176
-
CHANNEL NUMBERS/STANDARD PATCH: Gray Unselected channel White Channel is not selected by Only Function Yellow Selected channel. Controlled by the "Y" wheel CHANNEL NUMBERS/FIXTURE PATCH: Gray bar Surrounds all channels of one fixture Light gray Low channels for 16-bit data types Gold Channels...
-
Question Which Kurta Digitizer Tablets Work with Obsession and Expression 2/3 Consoles? Answer Size Kurta Model # 12 x 12 XGT 90031 12 x 17 XGT 90033
-
Expression 1 to 2 and Express 1 to 2 software allows you to convert shows created on the original Expression, Concept, Insight, and Impression consoles running software versions 1.7 or newer into a format compatible with ETC's newer Expression 2/Expression 3* or Express line of consoles. Be aware...
-
Running Version 2.0 and Lower Concept2x 1200 Expn2x 600 Insight2x 324 Insight2 108 Impression2 300 Running Version 3.01 and Higher Concept2x 1200 Expn2x 800 Expn3 400, 800, or 1200 Insight2x 512 Insight2 108 Insight3 512 Impression2 300
-
Question If a Net2 node is being used in Net1 mode are the ports assignable, as they would be in Net1 mode? Answer In Net1 mode, the ports of the node emulate the DMX ports on the console. For example, a 4 port node when connected to an Express console would output two separate universes of DMX via Port...