-
Problem: ETCLink hardware Not Installed If ETCLink wiring and Sensor CEM's show that ETCLink is operating correctly, check the CPU on the Expression 2/3 console. In Europe , DIP switch 1 is DOWN (ON). In the US , DIP switch 1 should be UP (OFF). Workaround / Fix
-
The monitors are jumping between screens and taking random key hits. It looks like a nasty macro is running. This generally means that the ETCLink and RFU cables are plugged in reverse order. Both have female 6-Pin Female XLR connectors. On the Expression series the connectors are side by side, and on...
-
Printers tested and/or sold for Express and Expression consoles HP-812c InkJet printer HP-810 Inkjet Printer Brother HL-1240 HPdeskjet 500 Epson 5000 Panasonic KX-P11801 Cannon BJC 4000 Panasonic KX-P4410Digital, DEC Colorwriter 120ic Make sure you verifie pin out and dip switch settingsIf having trouble...
-
How do I install the IRFU upgrade on an Expression 2-family console? Expression 2X, Concept 2X, and Impression 2: Open the console. Insert the IRFU EPROM into socket U55 making sure to align the chip and socket indentations. The socket is located on the lower left hand area of the face panel PCB. Attach...
-
The main differences are: Pre-universal consoles were manufactured before mid 1996. During that time is when the console was UL listed. The CPU and Power supply tray are exposed. In the Universal consoles, both trays are encased in silver. The power switch is a 2-pole keyswitch. The Universal consoles...
-
ETC has discovered a bug with Express/ion 3.1 software where some digitizers will not work with Net 2 nodes. Digitizers work fine with RVI's or RIU's but will not work with Net 2 Nodes in Net 1 mode. Currently, there is no work around.
-
ETC has identified a bug with Express/ion 3.1 software where a user cannot Track into, out of, or thru a part cue in the Stage or Blind screens. Tracking functions seem to work fine elsewhere. There are two known workarounds, until the bug is fixed in a future release. You can use the Spreadsheet screen...
-
The Thinnet / Twisted pair label is screened opposite of the actual toggle of the DIP switch on the back of Expression 3 and Insight 3 consoles. The manual has the correct settings, but the screening can be a cinfusing factor. For instance, if you wish to set a console up for twisted pair operation,...
-
Listed below are a list of the differences between an Impression I and and Impression II console. Impression I Impression II Number of Dimmers: 512 1024 Number of Channels: 150 300 Number of Cues: 400 600/500 Number of Submasters: 24 24 Number of Submaster Pages: 2 2 Number of Bump Buttons: 24 24 Timed...
-
On ECO's 7585 and 7705, ETC changed Bill of Materials for the Expression 3 and ECS power supply tray moving from the PS112 to PS160. Thus current bill of materials will not reflect the correct part number for the power supply used previously.