-
When equipment goes bad out in the field, it's often extremely helpful if the owner/end user can keep track of the circumstances of the failure. This is especially true when the problem is intermittent and might not occur when the technician is present. Service Technicians are exceptionally skillful...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
08-24-2009
Filed under: AAS, Acclaim, arri, ASTS, AVAB, CEM, CEM+, Congo, CongoJr, cRRFU, DAS, Dimmer, Distribution, DMX, ECMUX, Element, ELTS, Emphasis, Eos, ETCLink, Ethernet, Express, Expression, GCE, Idea, Ion, Irideon, K96, KnowledgeBase, Legacy Unison, LMI, Lon, MDD, MDR, MicroII, MicroVision, MIDI, MPE, NCE, Net2, Net3, Obsession, ObsessionII, Pharos, RDM, Response, RFR, RFU, RRFU, RS-232, RVI, Sensor, Sensor+, SineWave, SmartBar, SmartFade, SmartFadeML, SmartModule, SMPTE, Source Four, Source4, Touchscreen, Unison, Vision, WRFU
-
From our testing, Strand SN110 nodes seem to require a 6 millisecond idle time after the last stop bit. In order for ETC consoles and DMX nodes and gateways to send DMX to them you must set their DMX Output speed to "slow". A deep clear or reset will change this to "fast", so the...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
07-27-2009
Filed under: Congo, CongoJr, DMX, Element, Emphasis, Eos, Express, Expression, Ion, KnowledgeBase, Net2, Net3, Obsession, ObsessionII, SmartFade, SmartFadeML
-
Question Which Kurta Digitizer Tablets Work with Obsession and Expression 2/3 Consoles? Answer Size Kurta Model # 12 x 12 XGT 90031 12 x 17 XGT 90033
-
ETCNet, now known as ETCNet1 to differentiate it from ETCNet2 and Net3, was ETC's original Ethernet based control protocol. It is a proprietary protocol and the specifications are not publicly available. ETCNet1 is a raw ethernet protocol, meaning that it will not work over a routed network and may...
-
Here are the valid MSC parameter ranges that we allow for both the Obsession and Expression lines. Neither console will respond to a 7F "all device" command format. Labels shown within angle brackets <> can be set. Values shown in hexadecimal must not be changed. Obsession Format: Obsession...
-
HISTORY AND THEORY OF CONSOLE OPERATION THEORY OF OPERATION OF LIGHTING CONSOLES There are two primary control philosophies used in the operation of entertainment lighting consoles, Pile-On, wherein the highest level instruction given to a channel is output to associated dimmers and Last Action, wherein...
-
ETC uses the Neutrik zero-degree pin offset , 6-pin connector for all remote focus unit connections.