-
The monitors are jumping between screens and taking random key hits. It looks like a nasty macro is running. This generally means that the ETCLink and RFU cables are plugged in reverse order. Both have female 6-Pin Female XLR connectors. On the Expression series the connectors are side by side, and on...
-
Printers tested and/or sold for Express and Expression consoles HP-812c InkJet printer HP-810 Inkjet Printer Brother HL-1240 HPdeskjet 500 Epson 5000 Panasonic KX-P11801 Cannon BJC 4000 Panasonic KX-P4410Digital, DEC Colorwriter 120ic Make sure you verifie pin out and dip switch settingsIf having trouble...
-
ETC has discovered a bug with Express/ion 3.1 software where some digitizers will not work with Net 2 nodes. Digitizers work fine with RVI's or RIU's but will not work with Net 2 Nodes in Net 1 mode. Currently, there is no work around.
-
ETC has identified a bug with Express/ion 3.1 software where a user cannot Track into, out of, or thru a part cue in the Stage or Blind screens. Tracking functions seem to work fine elsewhere. There are two known workarounds, until the bug is fixed in a future release. You can use the Spreadsheet screen...
-
ETC has received questions about the accuracy of our real time clocks. The time clock is as accurate as the component that is used on the circuit board. Here are the component specifications. The Crystal located at [Y4] on the 4110B5001 Express processor PCB is accurate to +/- 60 parts per million. ETC...
-
Express consoles began shipping with a new power supply as of 10/8/2002. The obvious difference between this power supply and the original power supply is the connector from power supply to console. (which renders the two power supplies incompatible) The older power supply (was ETC part number PS127...
-
The 3-Pin XLR is wired like this: 1 - Chassis Ground 2 - Common Dim Leg 3 - +12 volt Connect lamp between pins 2 and 3.
-
The Express Console and Express LPC's provide four remote macro inputs through the 15-pin connector on the back panel labeled Remote Macro. A user-supplied remote device connects to the console via a 24 AWG, aluminum-shielded, multi-conductor cable with one twisted pair designated for each switch...
-
Question: How does the Express LPC clock disk work? Answer: Here are the directions for use of the Express LPC Clock Disk (ETC Part number: 4110A1014-1.0) This should be shipping with all the Express LPC's. Insert Clock Disk into disk drive Push "Read from disk" button Push Macro 1. This...
-
The crystal we use in Express / Expression 3 consoles is accurate to +/- 60 parts per million. Meaning? +/- 2 minutes per month +/- approximately 5 seconds per day.