-
Tabs, introduced in version 1.9 of software for Ion, are a useful tool in arranging and organizing data on the console. Much of this information has been drawn from the article Eos / Ion Display Conventions: Demystifying Eos and Ion Displays , available on the main ETC website. Using Tabs Both Eos and...
-
When the RFR starts up, it can be put into a variety of different modes by holding down keys on the keypad. A summary of those modes is shown here. Key Function [More SK] Software Upgrade Mode • Screen Displays "Remote boot Version0.3" [Clear] RFR setup mode: Set frequency, net id, signal...
-
To allow MIDI Show Control (MSC) to work with Cubase: In Cubase, select "Preferences." Select "MIDI Filters." Uncheck "System Exclusive" filter.
-
If you are having trouble connecting an Eos/Ion/Element client pc running Windows Vista to the master console (and you can ping the console), make sure the Service Location Protocol is 'Started' and 'Automatic'. To do this: Right-click on the 'My Computer' icon on the desktop...
-
When equipment goes bad out in the field, it's often extremely helpful if the owner/end user can keep track of the circumstances of the failure. This is especially true when the problem is intermittent and might not occur when the technician is present. Service Technicians are exceptionally skillful...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
08-24-2009
Filed under: AAS, Acclaim, arri, ASTS, AVAB, CEM, CEM+, Congo, CongoJr, cRRFU, DAS, Dimmer, Distribution, DMX, ECMUX, Element, ELTS, Emphasis, Eos, ETCLink, Ethernet, Express, Expression, GCE, Idea, Ion, Irideon, K96, KnowledgeBase, Legacy Unison, LMI, Lon, MDD, MDR, MicroII, MicroVision, MIDI, MPE, NCE, Net2, Net3, Obsession, ObsessionII, Pharos, RDM, Response, RFR, RFU, RRFU, RS-232, RVI, Sensor, Sensor+, SineWave, SmartBar, SmartFade, SmartFadeML, SmartModule, SMPTE, Source Four, Source4, Touchscreen, Unison, Vision, WRFU
-
From our testing, Strand SN110 nodes seem to require a 6 millisecond idle time after the last stop bit. In order for ETC consoles and DMX nodes and gateways to send DMX to them you must set their DMX Output speed to "slow". A deep clear or reset will change this to "fast", so the...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
07-27-2009
Filed under: Congo, CongoJr, DMX, Element, Emphasis, Eos, Express, Expression, Ion, KnowledgeBase, Net2, Net3, Obsession, ObsessionII, SmartFade, SmartFadeML
-
Attached is a spreadsheet that will allow you to map out your DMX to EMDX addresses based on universe number. 3632.EDMX_Translation_Charts.xls
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
07-24-2009
Filed under: CEM+, Congo, CongoJr, Element, Emphasis, Eos, Ion, KnowledgeBase, Legacy Unison, ObsessionII, Sensor+, Unison
-
Starting with v1.3.1 Eos and Ion support printing to an Acrobat PDF file rather than to a directly attached printer. To allow greater flexibility in transportation of information as well as compatibility with more printers, the software can now save a PDF to a USB drive. That allows the end-user to email...
-
In version 1.4 software we have noticed that using Expand on an RVI sometimes doesn't work. The work around to allow expands to work with an RVI: From the shell, go to the general tab and click on the monitor arrangement button. Move monitor 1 to the left box and put monitor 2 in the right box in...