-
Hardware MIDI Connections MIDI Show Control (MSC) MIDI Time Code (MTC) MIDI Notes SMPTE Eos Console No Via SC GW Via SC GW In Only Via SC GW** Out Only Via SC GW In Only Eos RPU No Via SC GW Via SC GW In Only Via SC GW** Out Only Via SC GW In Only Gio Yes, In/Out Local In/Out Also via SC GW Local In...
Posted to
ETC Product Wiki
by
Hans.Hinrichsen
on
12-04-2012
Filed under: analog in, contact closure, Element, Eos, Gio, Ion, MIDI, MIDI notes, MSC, MTC, relay out, Show Control, SMPTE
-
Touchscreen Monitors Eos Family consoles (Eos, Gio, Ion, Element), Eos Family RPUs, Net3 RVIs, support external touchscreens, as do Congo Family consoles (Congo, Congo Jr, Congo Kid), and Congo Light Servers running version 5+ software. Looking for Gio Console touchscreen information? Gio consoles have...
Posted to
ETC Product Wiki
by
Matt Pumplin
on
10-11-2012
Filed under: Accutouch, Congo, Congo Kid, CongoJr, Element, Elo, Eos, Eos Family RPUs, Eos RPU, Gio, Ion, Ion RPU, KnowledgeBase, Net3 RVI, RVI, Touchscreen
-
How to upgrade the output count of an Eos / Gio / Ion / RPU: If your Eos, Gio, or Ion console requires more outputs to control your system, it is possible to upgrade those consoles within certain ranges. Eos An Eos console or Eos RPU may support up to 16,384 (16k) outputs in groups of 4096 addresses...
-
Eos Console Monitor Arrangement If the software on your console is earlier than version 1.9.5, please see this article regarding monitor arrangement: Eos Configuration of External Monitors Before v.1.9.5 The Eos console supports any combination of DVI or VGA monitors through its 3 external monitor ports...
-
This problem description is caused by an issue found in the GCE installer on ETC consoles. Installing GCE version 2.0.2.9.0.7 (installer version) or higher will resolve this issue. For more information on installing GCE on an Eos Family console, please see the following article: Installing GCE on an...
-
ETCNet2 Network Configuration Editor (NCE) does not ship installed on an Eos Family console, but can be installed at any time. NCE is a useful tool used to configure Net2 DMX nodes, Net2 Video nodes, Net3 Gateways running in Net2 mode, and Net3 1 port gateways. To install NCE on an Eos Family console...
-
Here are some examples of how to achieve these common effects. These examples will be with channels 1 thru 10. Here are some common intensity effects: 1.) Simple intensity chase a. Create new effect 1, make it step based b. Step 1 thru 10 have channels 1 thru 10 c. In live, type [group][effect][1][enter...
-
How to update software on an Eos Family console or Net3 RVI: To find the version of your console's software, please see this article: Finding the Software Version on an Eos Family Console step 1) Download the latest software and release notes from the ETC website at etcconnect.com . Open the zip...
-
To configure external monitors on an Eos console running a version before v1.9.5: The configuration of the external monitors is done in the EOS Configuration Utility (the ECU, otherwise known as the Shell) To access the shell, press the Displays key, and select {Exit Eos} from the menu Press {Ok} After...
-
The type of MSC (Midi Show Control) commands Eos, Ion, and Element can take or send are very specific and preprogrammed into the software. The literal information is transmitted via a special language called a "hexadecimal string." In particular, Midi Show Control is a subset of the MIDI standard...