-
This problem description is caused by an issue found in the GCE installer on ETC consoles. Installing GCE version 2.0.2.9.0.7 (installer version) or higher will resolve this issue. For more information on installing GCE on an Eos Family console, please see the following article: Installing GCE on an...
-
ETCNet2 Network Configuration Editor (NCE) does not ship installed on an Eos Family console, but can be installed at any time. NCE is a useful tool used to configure Net2 DMX nodes, Net2 Video nodes, Net3 Gateways running in Net2 mode, and Net3 1 port gateways. To install NCE on an Eos Family console...
-
Here are some examples of how to achieve these common effects. These examples will be with channels 1 thru 10. Here are some common intensity effects: 1.) Simple intensity chase a. Create new effect 1, make it step based b. Step 1 thru 10 have channels 1 thru 10 c. In live, type [group][effect][1][enter...
-
How to update software on an Eos Family console or Net3 RVI: To find the version of your console's software, please see this article: Finding the Software Version on an Eos Family Console step 1) Download the latest software and release notes from the ETC website at etcconnect.com . Open the zip...
-
The type of MSC (Midi Show Control) commands Eos, Ion, and Element can take or send are very specific and preprogrammed into the software. The literal information is transmitted via a special language called a "hexadecimal string." In particular, Midi Show Control is a subset of the MIDI standard...
-
Console Onboard VGA DVI 1 DVI 2 DVI 3 Notes Eos - VGA & DVI VGA & DVI VGA & DVI - Eos RPU (DVI Splitter) Not Functional VGA & DVI VGA & DVI - - Eos RPU (Onboard DVI) VGA DVI DVI - *See Note Below Gio - VGA & DVI VGA & DVI VGA & DVI - Ion Console (Old & New) [*] VGA...
Posted to
ETC Product Wiki
by
starksk
on
04-26-2012
Filed under: Congo, Congo Kid, DVI, Element, Eos, Ion, Light Server, Monitor, RPU, RVI, VGA
-
With the release of Eos Family software version 1.9.5 and higher, consoles can now send MIDI Show Control-style messages (ASCII based, not hex) via Network UDP or RS-232 (through an I/O Gateway). Supported messages are as follows: Command / Action ASCII Text (What is sent) Comments Go (Cue) Cue x y x...
-
Default IP Ranges For ETC Products Below are the ETC Network addressing standards. Bold numbers or modes are the default for devices that ship with a preconfigured IP. These standard ranges should be used unless a different range is required by the site. ETC Product IP Range Congo 10.101.80.101 to 10...
Posted to
ETC Product Wiki
by
Tracy.Fitch
on
02-29-2012
Filed under: CEM+, CEM3, Congo, Congo Kid, CongoJr, DMX, Element, Emphasis, Eos, Ethernet, Gateway Configuration Editor, GCE, Ion, iphone, ipod, iRFR, IRFU, KnowledgeBase, Legacy Unison, Light Server, Mosaic, NCE, Net2, Net3, Network, Obsession, ObsessionII, Paradigm, Pharos, Sensor+, Show Control, Unison, WRFU
-
Eos and Ion versions 1.4.2 and higher, and Element 1.6 and higher support serial control of the system. Network UDP was added in version 1.9.5. The serial interface allows text to be sent to Eos through I/O Gateways. (The physical serial ports on older Ion consoles and all Eos/Ion RPUs are not currently...
-
My console just blue screened on me! What should I do? A blue screen (often referred to as a Blue Screen of Death, or BSoD) is a rare occurrence that can happen if there are hardware issues, driver problems, software issues, or equipment failure within the console. If you experience this, please Contact...
Posted to
ETC Product Wiki
by
Hans.Hinrichsen
on
02-02-2012
Filed under: blue screen, bsod, Congo, Congo Jr, Congo Kid, CongoJr, Element, Eos, Gio, Ion, stop code