-
When to Reload a Disk Image Loading the disk image is the way to upgrade the software to a new version of code in an Emphasis system. It is also the last resort method for getting a system up and running again if you suspect a server lockup caused by software. Keep in mind that if you use this utility...
-
How to Reload a Disk Image This entire process takes about 8-10 minutes. Boot server As soon as the Dell screen appears press F12 (this is very quick!) Note: If you see the Windows booting screen, you are too late. Restart and try again. You will see several options on a black screen. Down arrow to 4...
-
To create a facepanel software disk Exit Emphasis Insert a 3.5” HD floppy disk into the floppy drive on the Emphasis Server Login as System Manager Click OK to clear the warning screen Open the facepanel software folder located on the desktop Double-click the appropriate facepanel software file...
-
You must set the type of facepanel you have in your system to have the correct monitor outputs. Setting Facepanel Type Launch Emphasis Go to Visualization, Emphasis Mode Click on Setup Click on Facepanel Type Choose the facepanel that will be connected to the system Click OK Close Emphasis Relaunch Emphasis...
-
Setting Password for System Manager Login as System Manager Go to Start Button Select All Programs Select User Accounts Click Create a Password Type in password in appropriate spaces Type hint. This hint will appear when you press the question mark by the login. Click Create Password This password will...
-
When Transparency and a Material are used on the same surface, the Transparency will override the Material.
-
To Create a Square Hole e.g. a window. Example: Draw a Black box venue. Go to the front view. Click on the surface tool. Start your surface in the bottom left hand side. Move to the top left hand corner of your surface and click Move to the top right hand surface and click. Move to the bottom right hand...
-
To Create a Circular Hole e.g. a wall/surface with a porthole in. Example: Draw a Black box venue. Create two layers 1) Surface and, 2) Circle Go to the front view. Draw a circle with the diameter you require for the hole. Click on the surface tool. Enable the Ortho tool. Start your surface in the bottom...
-
Blurry renderings could be caused by anti-aliasing not being used properly. I'm not sure how much you know about the process of anti-aliasing, but the way it works is that once an image is rendered, the anti-aliasor (or whatever that part of the render engine is called) scans the file and determines...
-
Emphasis Nightwatchman Macro Use this macro when you need to reset the Timed Events List. This is necessary when you are using Looped Cues or Effects TimCdClockDi TimCd-IntClk 0 Enter TimCdClockEn This will reset the internal clock To create this macro, do so on the Emphasis Server. This will give you...